248/248 cams on S13 - Whats your opinion?

Information on the naturally-aspirated KA24E and KA24DE engines.
NateDogg
Posts: 811
Joined: Sat Aug 24, 2002 2:20 pm

Post

Hi guys,

I have the 'hot cams' in my 91 and was just wondering if it would be worthwhile swap in an extra exhaust cam that I have from a previous motor? What are your experiences with the 248/248 setup for NA? Is it a worthwhile HP gain or no? Anyone ever do a GTECH or drag run with the change?

Thanks,Nate


initial_d_s14
Posts: 77
Joined: Mon Feb 16, 2004 8:02 am
Car: 1995 240sx 1990 RX-7 1991 240sx

Post

i havent ran it but i heard that it isnt worth doing

User avatar
EstoMax
Posts: 659
Joined: Fri Jun 25, 2004 5:50 pm
Car: 95 240SX KA-t
94 d21 xe 4x4

Post

i have that in my 95 s14 and i love it. especially over 232/232, id say do it, it will pull better in higher rpms and u dont need the power down low anyway

max

User avatar
1991S13
Posts: 1230
Joined: Fri Nov 19, 2004 5:59 pm
Car: '91 240sx Coupe, '00 QX4 4x4, '02 Sentra Spec V
Contact:

Post

I think for an S14 it may be an improvement, but on a S13 I wouldn't do it. I was going to, but I decided to just go with a set of JWT cams instead.

Wouldn't pay to get it repinned, and I would be afraid of not getting the chain on the right tooth and smashing the valves into the pistons.


Return to “KA24E / KA24DE Forum”