240SX project

Post by **240SX BOI** » Mon Mar 21, 2011 7:54 pm

how much would a starter clutch, driveshaft , throttle cable , and a fork bezel cost for a 93 240sx nd where can i get them for low price

Post by **badbob2121** » Mon Mar 21, 2011 8:01 pm

the overload of information in this thread hurts my brain....

Post by **240SX BOI** » Mon Mar 21, 2011 8:17 pm

Would the parts be hard to find

Post by **badbob2121** » Mon Mar 21, 2011 8:20 pm

no not really, but maybe introducing what actual model 240 they are for would help you

serious lack of information...this will fail

Post by **240SX BOI** » Mon Mar 21, 2011 8:29 pm

Its a 93 240sx hatch

Post by **badbob2121** » Mon Mar 21, 2011 8:36 pm

see now thats a start... all ^this info should have been in the first post... so you want the parts cheap???

are you expecting aftermarket or oem/ oe replacement?? what do you want for the car? i assume you just want to get it running, so try local junkyards and the forrum f/s sections. other wise go to oriely's or pep boys.... they are not very expensive parts

Post by **240SX BOI** » Mon Mar 21, 2011 8:54 pm

K thanks man really appricate it and sorry bout the first info just 14 so im just learnin but cars

Post by **badbob2121** » Mon Mar 21, 2011 8:57 pm

its all good, but remember to be more informative when making your threads, it will get alot better response when you do.... good luck

Post by **240SX BOI** » Mon Mar 21, 2011 9:10 pm

k nd thanks nd 240sx's r really reliable right?

Post by **DanThaMan** » Mon Mar 21, 2011 10:00 pm

People here will respond to you better if you punctuate and spell entire words...you're not texting. 240's are pretty reliable if maintained. Keep in mind though, the car is almost 20 years old, things are bound to wear out or break. I also saw you're 14, that's awesome you're trying to learn about cars that young, keep it up man, there's lots of great info. on this site.

Post by **badbob2121** » Tue Mar 22, 2011 1:23 pm

as he said^^

they are reliable cars, only if properly maintained. you should always put neccessary maintaince at the top of your "To Do" list for you 240.... most importantly before you start your aftermarket mods..

Post by **laxands13** » Tue Mar 22, 2011 1:33 pm

Also, if your thinking about buying one with all those problems, reconsider lol. I'm 16, started looking when i was 14. Got one and turned out to have a s***load of problems, and my parents would barely let me touch it. Save your money for one in better shape. And he's right ^^ fix FIRST. Its no good having your car look good if you cant afford to have it run. end of my advice haha

Post by **FlipCoupe** » Tue Mar 22, 2011 2:22 pm

laxands13 wrote:Also, if your thinking about buying one with all those problems, reconsider lol. I'm 16, started looking when i was 14. Got one and turned out to have a s***load of problems, and my parents would barely let me touch it. Save your money for one in better shape. And he's right ^^ fix FIRST. Its no good having your car look good if you cant afford to have it run. end of my advice haha

+1

Buy a running 240 if you can find one, start fixing it slowly. You'll spoil the experience if you start with a pos that you can never get running...like my coupe...and hatch lol.

Post by **OutToWinPAHC** » Tue Mar 22, 2011 2:50 pm

The best thing you can do is the basics
Plugs, wires, cap, rotor and check timing
Clean iac, and throttle body
Replace fuel filter, air filter, PCV valve
Clean groung connection and harness plugs
Repllace gaskets as needed.
Belts replaced or adjusted
Fluids (GL-4 gear oil for transmission), motor oil, coolant (bled properly), differential

Then have the suspension, brakes and steering looked over and repalced as needed. Let the mods come later.

Post by **240SX BOI** » Tue Mar 22, 2011 4:49 pm

Well im gettin the 93 240sx hatch for $500 isnt tht a really good price?

Post by **krash** » Tue Mar 22, 2011 4:55 pm

hey, I started working on 240s when I was 14 too! Got my own when I Was 15.

500 is a good price, depending on the amount of work it needs. Does it run? Rust?

Post by **240SX BOI** » Tue Mar 22, 2011 5:02 pm

It needs starter clutch,fork bezel, throttle cable and driveshaft thts it nd I dont think any rust I might get it right now if you guys say its worth it.and now im trading my ps3 nd stuff for it nd it does not run

Post by **OutToWinPAHC** » Tue Mar 22, 2011 5:05 pm

Ehh if the shell is rust free maybe, but I bet the drivers framerail or shock towers have rust.

Post by **240SX BOI** » Tue Mar 22, 2011 5:14 pm

I asked him for a pic but he said he will send in like 2 hours by the way is the fork bezel nd the throttle cable hard to find? I couldnt find any on ebay

Post by **OutToWinPAHC** » Tue Mar 22, 2011 5:30 pm

I have no idea what a fork bezel is, but you can get a throttle cable used cheap

Post by **240SX BOI** » Tue Mar 22, 2011 5:47 pm

No rust,on it

Post by **240SX BOI** » Tue Mar 22, 2011 5:48 pm

O I have no clue what a fork bezel is ethier is haha

Post by **Xdisaster240sX** » Tue Mar 22, 2011 6:01 pm

240SX BOI wrote:k nd thanks nd 240sx's r really reliable right?

Post by **laxands13** » Wed Mar 23, 2011 1:34 pm

If you dont know what the part is then I would advise not getting it knowing your gonna have to replace it. Just my opinion, maybe your more naturally mechanically inclined than i am haha

Post by **DanThaMan** » Wed Mar 23, 2011 9:18 pm

I've heard of radio bezels and clutch forks but not a combination lol

240SX project

240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Re: 240SX project

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums