240sx MC Upgrade (Brake bias)

[240sxinlv]

Hello,

On my 97 240sx with 300zx front brakes my fronts are locking to soon.

I have messed with camber, tire pressures, and of course bled them for hours...nothing helps.

I have read that the 300zx MC swap gives better pedal feel but will it increase rear brake bias?

Thanks!

[skydragoness]

Define 'locking too soon'... is this with just regular driving or when you drive hard?I run Z32 brakes on the front and I don't have that problem. I have plenty of room to 'modulate' the brakes. I'd look into whether your rear calipers are leaking and/or seized. Also, do you use stainless steel brake lines? If not, get them asap.

[240sxinlv]

The fronts lock before the rear.

The question is will installing the 300zx MC move more bias to the rear?

[240sxinlv]

anyone?

All the articles I have come across say the pedal feel will be better with the 300zx MC but none talk about if it will move more braking power to the rear.

I am not expecting miracles with the 300zx MC just want to know ANY info on getting the rears to lock before the fronts.....other then installing a valve.

THANKS!!!

[naed240sx]

The fronts are supposed to lock before the rears.... but if you want an easy way to change bias, run more aggressive pads in the rear.

[94_240sx]

I would get z32 BMC anyway. Never seen a negative feedback on it. You got nothing to loose, so I'd go ahead and see what happens along with new pads.

[adrianfromthecastle]

yes.

get the damn BMC...!