240sx L28 swap ???????? Thoughts???

ONLY for ADVANCED technical discussion about the 240sx!
Killg0re666
Posts: 5
Joined: Sat Nov 14, 2009 5:08 am
Car: 240sx L28 Swap in progress

Post

I am trying to collect all the pieces to put a 79 280zx mtr in the lightest year 240sx . I have never heard of this being done but someone must have I'm looking for some tips to save myself some trial and error....... Anyone?


User avatar
p3tchSR
Posts: 39
Joined: Sun May 17, 2009 7:16 pm
Car: 92 240sx
Contact:

Post

I may be wrong on this but doesn't an RB bolt right up to the transmission in the 280 and possibly even mounts. So there's kits for RBs to go in 240's so maybe slightly modified RB kit will help out.

Killg0re666
Posts: 5
Joined: Sat Nov 14, 2009 5:08 am
Car: 240sx L28 Swap in progress

Post

i;m kind of new to nissans what is a rb?

User avatar
moso
Posts: 801
Joined: Sat Jul 04, 2009 5:14 pm
Car: 89 240sx ka24de 5spd
90 240sx ka24de RIP

Post

wiki nissan engines , thay have a nice list and some basic info on them, enough to get familiar with them.

User avatar
p3tchSR
Posts: 39
Joined: Sun May 17, 2009 7:16 pm
Car: 92 240sx
Contact:

Post

That swap would be different but there is easier swaps with far more support on the forums to get threw it easy...that wiring/mounting will be long lonely and expensive with less power than common swaps

Killg0re666
Posts: 5
Joined: Sat Nov 14, 2009 5:08 am
Car: 240sx L28 Swap in progress

Post

I'm not realy into 240s I have the L28 with work done to it already I need a home for it maybe a 240 is not a good match for it . I thought that a makeing a new style 240Zx would be kina unique. I realize that a det motor or some turbo creation could be faster but my L28 is no slouch and it has centamental value i loved my 79 280zx.

User avatar
p3tchSR
Posts: 39
Joined: Sun May 17, 2009 7:16 pm
Car: 92 240sx
Contact:

Post

Well I can't argue with that...Research the RB into 280zx swap to see how alike the blocks are for mounting.Then if there similar mod a kit for RB into 240.Get a full system wiring diagram for both 280zx and 240sx and figure out what wiring it will take to run the 280 ecu into the 240 harness/dashhttp://www.lsauto.com/products.asp (they offer a tach to run 6cyl)about all I can help

Keep us posted always like to see new ideas...

Killg0re666
Posts: 5
Joined: Sat Nov 14, 2009 5:08 am
Car: 240sx L28 Swap in progress

Post

tHANKS MAN I'LL CHECK IT OUT

User avatar
Ni$$@n240
Posts: 204
Joined: Sun Nov 22, 2009 12:45 pm
Car: Currently 1995 S14 Se
Location: Illinois

Post

My friend was considering doing something like this also. I would say go for it. I thought these motors had carbs on them and mechanical fuel pumps. Not sure about the turbo motors but i cant see that there would be much to wire.

User avatar
lumski240
Posts: 20
Joined: Mon Jul 13, 2009 9:37 am
Car: 89 DOHC 240sx Hatch

Post

are you trying to put the 280 motor in a 240?? what happend to the 280 shell??

Killg0re666
Posts: 5
Joined: Sat Nov 14, 2009 5:08 am
Car: 240sx L28 Swap in progress

Post

I am not even gonna do this project anymore 240's suck I'm buyen a civic and puten a b16 in it . moast 240's will only see the taillights though sorry guys

User avatar
Ni$$@n240
Posts: 204
Joined: Sun Nov 22, 2009 12:45 pm
Car: Currently 1995 S14 Se
Location: Illinois

Post

Then get off this Forum

User avatar
sx moneypit
Posts: 8911
Joined: Wed Aug 26, 2009 2:54 am
Car: 2010 Nissan 370Z
1986 Toyota MR2
Location: Memphis,Tn.

Post

What a moron.


Return to “240SX Technical Forum”