240sx Electrical power

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
KA_SLIDER
Posts: 8
Joined: Wed Dec 10, 2008 11:57 am
Car: S13 Coupe

Post

Well i was installing some L.E.D's in the inside of my car, but when i was splicing the floor light wire on the passenger side, it accidently cut. So now there is no power leading to any part of the inside of the car from, radio,Dome LIght, and seat belts. And battery was dead when trying to start so a jump start was needed. Anyone has any idea what it may be?


User avatar
Sileighty_85
Posts: 149
Joined: Mon Jan 19, 2009 2:42 pm
Car: 1991 180SX

Post

KA_SLIDER wrote:Well i was installing some L.E.D's in the inside of my car, but when i was splicing the floor light wire on the passenger side, it accidently cut. So now there is no power leading to any part of the inside of the car from, radio,Dome LIght, and seat belts. And battery was dead when trying to start so a jump start was needed. Anyone has any idea what it may be?
blown fuse Check them

you should never preform any electrical work on a car with the batter still connected

User avatar
KA_SLIDER
Posts: 8
Joined: Wed Dec 10, 2008 11:57 am
Car: S13 Coupe

Post

Okay, so i checked all fuses. None of them seem to be blown. But this morning when i tryed to start, the battery was dying. As if sumting is running the battery down. Nothing was left on, and im wondering if it had to do with the floor light wire which was cut but was reconnected and blacktaped. ???

User avatar
KA_SLIDER
Posts: 8
Joined: Wed Dec 10, 2008 11:57 am
Car: S13 Coupe

Post

Btw, can the ignition fuse under the hood can be a cause why the gauge and radio and lights inside the car not to work?


Return to “240SX Technical Forum”