240sx -95 s14 transmission

ONLY for ADVANCED technical discussion about the 240sx!
max.Fi
Posts: 8
Joined: Wed Aug 13, 2008 7:28 pm
Car: 240sx -95 ka24de

Post

is nissan Nissan Hardbody Truck 2wd ka24e -93, and 240sx ka24de same transmission(manual)?


User avatar
ashoe
Posts: 111
Joined: Tue Feb 05, 2008 5:22 am
Car: 1996 nissan 240sx se, 2006 subaru wrx

Post

Its not the same bellhousing, i know that much. But if you swap the bellhousing the transmission would most likely fit. The gear ratios would probably suck tho. I had one of those trucks and first was good for like ten mph.

max.Fi
Posts: 8
Joined: Wed Aug 13, 2008 7:28 pm
Car: 240sx -95 ka24de

Post

do you know what difrent is bellhousingthere finland are many manul transmisssion (sr20det) but i dont find ka24de bellhousingand if i buy usa transmission it cost too much, because i need knapsack cargo. iT cost 1500€if somebody have accessory bellhousing please post me sorry i have very bad english,,,,,,,,

max.Fi
Posts: 8
Joined: Wed Aug 13, 2008 7:28 pm
Car: 240sx -95 ka24de

Post

gear rations is the same in both vechiles, but that bellhousing???what´s different?

User avatar
ashoe
Posts: 111
Joined: Tue Feb 05, 2008 5:22 am
Car: 1996 nissan 240sx se, 2006 subaru wrx

Post

The Ka24de engine needs a ka24de bellhousing. The ka24d engine needs its bellhousing. The bolt pattern changed. So if you just have a DE engine the transmission off a 93 will not bolt up.

max.Fi
Posts: 8
Joined: Wed Aug 13, 2008 7:28 pm
Car: 240sx -95 ka24de

Post

if somebohy have got parts: post me-wlywheel+ clutch-bellhousing (ka24de)-startmotor-rear plate (between engine and transmission)

i dont need trasnmission because cargo cost too much here

finland


Return to “240SX Technical Forum”