240sx 95 power window problem

[y11ngdanjr]

Wassup guys I gotta prob with my driver's side window and I'd appreciate some expert advice from all u 240sx gurus

There is a clicking noise when I push down on the power window button, but the window seldomly goes down. Sometimes it goes down, but wont go back up so right now I don't even roll it down nemore.

I dont really know what to replace. The amp, regulator, switch, or motor.

I'm guessing it is not the switch cuz it goes down sometimes, but i could be wrong.

is the regulator the same as the motor?

any help would be greatly appreciated

peace guys

[180fan]

it could still be the switch. Does it work when you move the window on a different switch? Otherwise I'd suspect it's getting moved out of alignment or hitting something on its way down from the click you mentioned.

[y11ngdanjr]

since it's on the driver's side there is only one switch for the driver's side window. ne more input guys?

i read on another post that it could be the amp....

[y11ngdanjr]

bump

[jin3001]

same problem here.fixed with a new amp and a 14 inch wire tie .old amp was bad ,installed a new one but terminals were worn had to put a wire tie around amp and connector to make work now it works every time .hope this helps