2010 Altima Coupe Halo ring install (NEED SIZES)

[Recon13x]

Hey guys I am planning a headlight build, thinking to do some retrofit and what not.
Problem is I CANNOT for the life of me find the size of the halo rings diameters.
I've heard 80mm or 90mm for the low beam and 100mm for the high? It is my best guess looking at it. The low beam projector is 2.5 inches which is around 65mm i think BUT i want the ring to sit on the lip of the shroud, I will be using the stock shroud. Below is a picture link of the headlights I am working with:

http://i50.tinypic.com/fv0x5.jpg


If anyone knows the size of those two low and high beam rings it would be great, or at least someone who got a kit from oracle for that specific headlight if they know their halo ring sizes. Thanks guys!

P.S. I am only installing a halo ring on the low beam while the high beam is getting a round "spot led" pod that is 4 inches but I need to make sure it clears before I order.

[Recon13x]

Well I had a feeling no one else would know. Or at least let me know in time.
I already ordered the parts so I suppose when I get the parts and open the headlight I'll measure (and hope i guessed correctly) and report back here so next time someone like me comes along they can know
Planning a taillight build also inspired by the one I saw in these forums.

[Recon13x]

Hey guys here is what I ended up doing in terms of lights; so what I used is a 90 mm ring on the low beam and i installed a 4.2 inch LED pod on the high beam which i effectively filed down to 4 - 4.1 inches. You can see how these sit in the pictures below and go off that.
The ring on low beam is in the middle of that "lip".
The led pod edge you can not really see from the front as the high beam inner "lip" is about 3.7 -3.8 inches ID.
The projector is actually also new (one of those cheap $25 mini H1 projectors) that i retrofitted (pain in my butt). But I really wanted the high beam bucket, never cared for it till now for some stupid reason. Also painted the cutoff plate red.

Here are the lights all finished. Excuse the messy room



And in case you are wondering about my color choice it was cause of my car and rims:


And here is the ring and pod lit up, don't let the picture fool you the lights match at a nice crisp white, no picture of halos by themselves but they look amazing as DRLs at all times running alone:

[seldomseen]

Looks dope! Keep up the good work.

[Recon13x]

Thanks man!
I'm hoping this thread will help someone else like me looking for these sizes!

[Scheppe]

I have been trying to find this information out for so long!!! Thank you!! So the low beams are 90mm, how big are the high beams? Also, where did you get your halos?

[Recon13x]

I got them on Amazon but it doesn't make a difference where, sorry to reply so late. make sure they at least come with a driver.
I mentioned above the high beam sizes u can estimate off that cause i stupidly forgot to explicitly measure -.-

[Recon13x]

I would say 100mm is the safe bet if i had to order RIGHT now but idk take that with a grain of salt!