200sx gti-r swap help

[200sx GTi-R]

i know that there are plenty of these same topics on the forum but im new and im in a jam so ya my bad..

any way i have a 98 200sx se-r that i am in the middle of swapping in a gti-r sr20det out of a pulsar gti-r. n way the problem that i am having is that the 8 flywheel bolts that bolt the flywheel to the motor arnt the same i rly need help with this plz call me i am not on the computer very much thank you (920)251-4588

Jake

[RED_DET]

You have to use the clutch and flywheel from your 200sx. The pulsar transmission, flywheel and clutch are completely different. It is AWD platform.

[200sx GTi-R]

well i found out that the 8 bolts that bolt the flywheel to the crank on a gti-r motor are indeed different then the usdm sr20de the jdm bolts are 11m x 1.00 not 10mm x 1.25 like the usdm sr20de. but thank you o and and by the way i found out that the bolts that bolt the flywheel to to the crank on a JDM GTi-R sr20det are the same as a 99 ford escort zx2 2.0 dohc motor just an FYI