2008 QX 56 Wiring Diagram

[bkelly]

Looking for a factory wiring diagram for a 2008 QX56. Would an'07 be the same as an '08?

[Timmbo]

Welcome to NICOclub! Glad to have you as part of the Armada/QX56 Forum!

I am not sure if you have seen this yet, but here is the service manual for an '08 ARMADA, not the QX56. This would be more accurate than using an '07 service manual for the QX56. There were some significant changes from '07 to '08, but I believe everything is the same from the QX56 to the Armada. Let me know if this works!!!!

http://www.nicoclub.com/FSM/armada/

[bkelly]

Thanks for the feedback. I am trying to complete the DVD mod you described some time ago to be able to view while moving. I have the speed sensor worked out but the e-brake is still a problem. I have put relays in line with pin #80 and #82, but the ground wire at the e-brake overrides. Grouding this wire allows me to view but the brake buzzer and light stay on. Have any ideas?

[Timmbo]

Hmmm, I am not sure on that one, I have not personally completed the mod on my '08, let me know how things turn out, I would appreciate it.

[bumpssi]

hey man... you cannot just ground the brake wire you need to cut it and put in on a relay also, giving only the radio side ground. if you do this the lights on your dash will not go off and you will be able to view video. do this along with the vss on a switch and u should be fine

[bkelly]

Sorry if I was'nt clear. That is what I did and it works perfect. The 5-prong relays were the ticket for me.