2007 350Z Parts

[bmike818]

I can not find any parts for the 2007 350Z. Does anybody know where I can find some. I am particularly interested in an Air Intake kit. If anybody has an 07 and already put an intake, please post it, I want to see it.

[evildky]

should be the same as the 2003-2007 models right? they didn't change the motor till the 08 and even then I don't know if it's enough of a change to make the intake any different, JWT and Stillen would know for sure but I'm willing to wager many retailers found in our list of sponsors would be able to tell you

[Exar-Kun]

Negative DK. THe new 2007 has the twin-intake system as on the new 07 G35.

Short story: you're screwed until someone does the research to upgrade it. CHances are, it's pretty efficient to begin with, and your best bet will be a set of K+N replacement filters.

Engines were :

2003-2005 VQ35DE VV on one cam 287hp 287tq (I think)2005 Track and 35th aniversary VQ35DE VV on both cams 300hp 274 lb/ft2006 same engine as above, automatics got 287hp version2007 - VQ35DEHR - 306hp twin-symetrical intakes large engine design change

Exhausts should work just fine.I'd get a NISMO or HKS exhaust to bide the time until they make an intake.



-CHet

[evildky]

wow I didn't know that, I guess that penzoi comercial where the 350Z engine jumps out and has twin intakes was just ahead of it's time

you could always buy some mandrel bends and get creative, I'm sure the big names are already working on it

[07 350z]

should be the same as the 2003-2007 models right? they didn't change the motor till the 08 and even then I don't know if it's enough of a change to make the intake any different, JWT and Stillen would know for sure but I'm willing to wager many retailers found in our list of sponsors would be able to tell you

I am new to the forum and I just got my new 07 Z also and there is nothing out there in the air filter market. I am going to measure the filters tonight to see if K&N has a filter to match. I will have to buy two of them but well worth it. If you come accross anything please let me know.

[DeepBlueHR]

http://www.cardomain.com/ride/2597965Here are 2 pictures from my cardomain website of my 2007 Z with a custom twin intake system. I modified 2 intakes for a 92-95 Civic and cut holes for the maf sensors. They look and sound cool, but I am having some idiling problems. I think the intake pipes are to big and messing with the maf sensors. Any suggestions let me know. Sorry I could not post the pictures, I haven't figured how to post pics here yet.

[bmike818]

Stillen shoud be releasing their intake kit for the 07 Z on May12 during their Nissan/Infiniti day. I am hopefully going to score my intake for less. During Stillen day, vendors are going to be offering parts at reduced prices...im not cheap...im frugal

[CS-07-Z]

Hey there - nice work with the custom CAI - very impressive ! !

How much did it cost you? Can you send me some guidence tips for the install - would LOVE to create the same setup in my 07-Z

Thanks for any help and info -

[07 350z]

Stillen shoud be releasing their intake kit for the 07 Z on May12 during their Nissan/Infiniti day. I am hopefully going to score my intake for less. During Stillen day, vendors are going to be offering parts at reduced prices...im not cheap...im frugal

Did Stillen offer anything at Nissan / Infiniti day as you thought they might do?

[cory2081]

Check out Stillen's website, http://www.stillen.com/product...&c=PEthere is the 1st CAI kit for the '07 Z. Looks nice, too bad they did not post any dyno results.

[bmike818]

hello, sorry I did not make it to Stillen day... they havent finished the intake yet. I was just talking with them and they are saying that the intakw ill be ready to ship by early next week it will cost $399 + shipping. I found out that the discount offered on Stillen day wasnt that significant.

[07 350z]

Thanks for the info update--I will keep an eye out for it to come onto there website.

I checked the website and it's there. It looks like two filters and brackets.I emailed them for a list of components to check it out. It seems like alot for two filters and brackets.
Modified by 07 350z at 10:56 AM 5/16/2007

[bmike818]

dont forget HR owners...our engines get an extra 6 ponies when traveling @ 60mph beacuse of the dual intake..make sure your aftermarket intake utilize this RAM air effect

[Danzors]

I dunno if this is true or not, but the locking limited slip diffs should fit too if you're planning on upgrading that from the sucky viscous.

[Narsisio]

Stillen has finally got some pictures up for the dual air intake but its not the whole tube. Stillen's is really clean looking and you can trust there product. I saw one that a guy made on his own. Two filters it looks just like it stillens but his car didnt idle properly. I cant wait anymore $400 bucks is not alot to get two air intakes.

[DeepBlueHR]

I just received and installed my Stillen dual air intake. I'm not really impressed with the looks, but the fitment is great. I wish it had an intake tube with it. The intakes sound very throating under hard acceleration and the pedal is more responsive. I never got my other dual intakes to idel properly so I broke down and bought Stillen's. Good brand, good fitment, easy to install and sounds mean. I now need an exhaust...any suggestions for an 07?
Modified by DeepBlueHR at 8:55 PM 5/29/2007

[cory2081]

Congrats on the first mod. As far as exhaust goes, I'm on the fence as well, can't decide. I'm leaning towards the Greddy EVO2. I like the way it sounds and it looks good. I'm having a hard time finding any reviews about quality, fitment, etc. But, hey, it's Greddy, gotta be good right?

[bmike818]

here is a pix of the Stillen Dual Intake-I dont have mine yet

[DeepBlueHR]

I like the sound of the Greddy exhaust as well. Let me know if you get one and if you find a good price.

[bmike818]

after 1 year, I am finally getting my intake. I ordered my Nismo intake today for a steal of $360. Hope it gets in by Friday, all the videos in Youtube with Zs with intakes is getting me hyped.

...wooHoo!

[07bluerocketZ]

nice...i just got my NISMO intake system installed 3 weeks ago...it tood me 2hrs to install....I took a little video and put it on youtube(search 350 Z twin intakes)...i didnt get on it but 1st and 2nd gear is what i hit but shifted from 1st to 2nd at 6800rpms..you feel a little difference above 3500rpms...post pics when u can and good luck

[bmike818]

it took you two hours...

..it took me a day and a half, because I couldnt find my 10mm wrench. Worst thing was the crank case vent tubing. It was all worth it, the intake sounds great, and after driving for a half hour I checked under the hood. I found that the airfilters stayed cool, thanks to the heat shield.

[07bluerocketZ]

did u remove the front bumper to remove the air ducts????and it was a PITA to put the crank case vent tubes for me too....but very nice....good job....

[bmike818]

I did not have to remove my front bumper to remove the airducts. The left one came out no prob. The right one on the other hand took some twisting, but eventually got it out with no scratch on the bumper. Gas mileage is great when cruising, but when you want to hear the airfilters it uses a lot of gas-but it sure sounds crazy.

[rmezz13]

Just a little heads up for readers looking for intake options for the 07+ 350z's. JWT (Jim Wolf Technologies) has the twin Pop-Charger intakes on their website. Don't have the link on this notebook, google Jim Wolf Technologies. Just another option, i know how people like the pop-chargers so well......

[NSRsheets]

For intakes there are a lot of options. Ikonw that AEM, Fujita, Stillen, and Nismo all make ones for the 07 350z. The exhaust should be the same as the previous gen ones.

[07bluerocketZ]

yea the exhaust is the same as the previous model Z....i tried to remove the air ducts but i can't get them out...i HAVE to remove the front bumper cuz i dont want to break the air ducts cuz i need them for smog.....