2006 M35 Front Lip Spoiler

[Satak528]

Can anyone advise how far apart the G35 bumpers are from the M? I noticed that the G35 has about 20 different lip spoilers in urethane. How much modification; if any do I have to do to get it to fit?

I purchased an altima lip with pretty bad results. Any suggestions?
I'd like to stay away from fiberglass. I never understood the love affair with that bastard of a material.

[mexillis]

Maybe try a 5 series BMW or a c class Mercedes. All the mounting holes won't line up but they are about the same size as an M and some have used parts from those cars to fit.

[Satak528]

What about G35

[shockwave20]

Maybe try a 5 series BMW or a c class Mercedes. All the mounting holes won't line up but they are about the same size as an M and some have used parts from those cars to fit.

Did anyone tried those lip on a m before?

[mexillis]

Only people over seas. Here's a 5 series lip on a M

This is a bumper fitted from a c class to a M

[Satak528]

Which model 5 series are they swapping?

[mexillis]

For the five series it's just a lip so the model wouldn't matter since that usually changes engine size.

[Satak528]

Yea but don't they have 4 facelifts since the e39?

[Satak528]

so far I have eliminated the Altima lip. I purchase the g35 coupe lip last night and will advise if that 1 fits in a few days. if the g35 lip does not fit my next step is the 5 series.

I'm surprised no 1 has ever examine the issue of no aftermarket lips yet. Something has to give.

I guess I will have to be the guinea pig.

[mexillis]

Yea but don't they have 4 facelifts since the e39?

Now I know what you mean... E60/61 is the one they used. Most people just go with a newer model M bumper swap instead of adding a lip that might not fit. Gl with trial and error, I'm sure someone will appreciate it down the road.

[Satak528]

I just purchased a heat gun to mold the urethane If I have to.

[06M4.5]

in for pics

[mr_luv]

G35 is too short.

[Satak528]

G35 is too short.

Do you think it can be modified to fit? How much of a difference

[mr_luv]

First what type of lip are you going for splitter style, chin lip? I would look for a lip near the same width of the car or close. I am using the G37 Coupe Stillen lip it will need to widened about 2.5 inches but follows the lines of my bumper pretty well, 08+ Sport bumper. Or as Mexillis stated the BMW E60/61 would be a great choice as a lip.

G35 is too short.

Do you think it can be modified to fit? How much of a difference

[Satak528]

Im trying to avoid the splitter look.

[Satak528]

This is the lip spoiler i picked up...ill try to modify it to fit...we'll see what happens

http://www.ebay.com/itm/120908248178?ss ... 1439.l2649

[06M4.5]

Not bad for $69

but that lip may not flow with an M

[Satak528]

http://www.freshalloy.com/showthread.ph ... ler-(pics)

This what it would look like if it fits

[mexillis]

You might need to cut the center and add material to make it work. Shouldn't be that much I would think to have a shop make it fit.

[Satak528]

Thats the plan! I hope it works

[Ilya]

If it looks good, maybe you can start a business making them for members lol.

[Satak528]

I actually did think about that and there is a huge market for it. I still cannot believe that after 7 years of this vehicle being on the road no 1 has capitalized on making a cheap aftermarket urethane lip or even a body kit.

[Satak528]

Our Japanese counterparts are selling urethane body kits for almost 3000 dollars shipped to the United States that is absolutely absurd. I noticed that people are actually buying them too that's the worst part

[06M4.5]

$3,000 is on the low side and lets not forget the 12 week waiting time if your lucky.

[Satak528]

$3,000 is on the low side and lets not forget the 12 week waiting time if your lucky.

I agree...it I'd on the low side. Hopefully an entrepreneur is monitoring this rant and takes immediate action. Lol

[06M4.5]

I tried to get the front & rear splitters and rear fin diffusers done but no one was willing to give me a good deal unless I was ordering 500 sets at a time.

I get people asking me for them all the time.

[Satak528]

I tried to get the front & rear splitters and rear fin diffusers done but no one was willing to give me a good deal unless I was ordering 500 sets at a time.

I get people asking me for them all the time.

Do you have a shop? Where are you located?

[06M4.5]

No shop, In New Jersey

[hahakenny]

Wonder if any of these would fit. I've thought about about how the shape of the newer altimas kinda resemble the M45 (though most likely I'm wrong). Probably worth a try right?


http://www.ebay.com/itm/2007-2009-Nissa ... e8&vxp=mtr


http://www.ebay.com/itm/02-04-NISSAN-AL ... ad&vxp=mtr


http://www.ebay.com/itm/07-09-Nissan-Al ... db&vxp=mtr