2006 hid conversion done, now headlights shine too high

[BigMike1985]

I have an 06 se with the halogen hir bulbs. I recently purchased the hid conversion kit, got my friend to install them at his shop. They work fine but i need the fog lights on when i drive at night because the light output shoots too high and it doesnt shine well on the road. I had to purchase the 9006 bulbs and fit it into the 9012 socket (pretty much the same fit). Are the bulbs off balance or something???

[Darktide]

there should be adjustment screws on the back of the headlights. Your friend should have known this. I guaranty that you are blinding the hell out of everyone who's driving in the other direction. Get that taken care of ASAP

[Mr.Twister]

start thinking of overly-obvious stuff and you will find you answer.hint/start with headlight adjustment.

[jsmithsole]

Also if you didn't replace the halogen projectors with the HID ones the cutoff will not be as good. But with adjustment you should be OK...

[blazncypher]

go to danielsternlighting.com he has a whole write up on to properly adjust your headlights or you can take them to your local shop and have it done professionally thats what i would do