2006 350z calipers and rotors?

[blueis300]

Will they fit on the front of my 2007 maxima?

[ruffryder]

I know people that successfully put the Nissan 300zx TT (twin turbo) calipers on their maximas/i30's. Those calipers, being as they are coming off a twin turbo are 4 piston in the front!

[jltibbs]

hey mark, this is jeremiah from advance. glad you're signed up here. hopefully someone on here has done this mod and will have some info on that for you. anyways, hit me up if there's anything you need bro.

[MinisterofDOOM]

As far as I know, the Z rotors are larger diameter than the Maxima rotors. Z rotors are over 12 inch diameter, while the Maxima's are 11-something.

I don't believe they'll work without modification.

This is just off the top of my head, though. I'll see if I can turn up something more definite.

[jltibbs]

i'm guessing, with that in mind, that you could remove that plate behind the rotor, and as long as everything else bolts up, you'll be alright.

[blueis300]

The front rotors on the 2007 maxima are 12.6", the rotors on the 06-07 350z are the same size. I just ordered some. Also am getting ready to get SS front lines and give a call to a guy who has 2006 front 350z calipers for $75 each plus shipping. They are 2 piston and hope they work, I was told from a very knowledgeable person they will. MY 2004 driller/slotted rear 350z rotors arrived today along with ss lines. I already had 2003 rear calipers and hope to try and do something this weekend with the rears.

jeremiah, you free this weekend at all and maybe give me a hand? Email me at [email protected]

thanks

mark

[blueis300]

Well just confirmed my order for 2 2006 350z 2 pistons non brembo calipers for abot $170 shipped.

[jltibbs]

sorry bro, i just saw this. worked 7-5 today and i work 2-10 tomorrow. i couls swing by for a min tomorrow. i'll call you around 1130.