2003 M45 Glove box removal

[tbink001]

Can anyone please post instructions how to remove the glove box on a 2003 M45? I have removed the glove box door, but I need to get to the blower motor amp that sits next to the ECM.

Thanks for your help!
Tony

[WDRacing]

You might be able to use the FSM, there is a link in my signature.

Welcome to Nico!

[tbink001]

Thanks for the reply. I looked on IP-14 and 15 about Glove Box Removal. The instructions are very vague. I tried to search this site prior to my post but could not locate this topic. If you, or anyone else, can provide any more detail at all it would be very helpful. I'm trying to get at the Amp Controller for the blower motor.

Thanks again.

[IIXtremeHansen]

It isn't hard. Pop side pillar off, 2 screws in bottom, 7 when you open. Disconnect plugs, Then pull if i remeber correctly. Had to remove it to scope out the cd changer. Shouldn't take more than 15min.

[tbink001]

Do you have any pictures? What are you calling the side pillar and how does it "pop off"? I removed 7 screws plus the 2 for the stricker plate but it would not budge.

[tbink001]

Thanks for the help guys. It is pretty easy. With the glove box door open there are seven phillips screws plus 2 more that hold the sticker plate. After removing these, you can pull straight out from the bottom and then "hinge" open the clips at the top.

[WDRacing]

Glad you able to get it off without breaking something. I always break something when removing interior stuff.