2003 Infiniti M45 sputter resolved (Fix: Crankshaft sensor)

Forum for Infiniti M35 and M45, and Nissan Fuga owners.
User avatar
kp1
Posts: 71
Joined: Sat Mar 13, 2010 9:28 am
Car: 2003 Infiniti M45

Post

my car was stalling on start up and puttering for the last couple years has gotten worse over time the right solution that fixed this problem was the crank shaft sensor A i just replaced all my cams and my crank they started to fail around 120k this makes me feel so much more relieved now that i got to the bottom of this problem thanks for all the help forum members


Larz
Moderator
Posts: 2894
Joined: Thu Feb 21, 2013 8:55 pm
Car: 2019 Q70-L RWD
Location: Ft Lauderdale, Florida
Contact:

Post

Although I am not the member who helped you, I am glad to see you got the help you needed. I love the M's with your body style. I am convinced that at least among Infiniti owners and fans, that body style will be regarded as a classic design. Truly timeless with an aggressive, yet luxurious stance.

EdBwoy
Moderator
Posts: 3352
Joined: Tue Dec 25, 2012 12:47 am
Location: Indiana, USA
Contact:

Post

:dblthumb: Glad you found a fix for your long term issues kp1.
So you were having issues with no codes thrown?

User avatar
kp1
Posts: 71
Joined: Sat Mar 13, 2010 9:28 am
Car: 2003 Infiniti M45

Post

at first no codes doing weeks of research i decided to change the cams and crank theres 3 sensors that i diagnosed by reading these forums had them replaced problem went away for a while then started again slightly over the last couple weeks started getting worse where my car felt like it was gonna stall everytime i drove it decided to see if there was a code for this problem since my check engine lights been on and off for over a year do to a small evap leak and boom the code pulled crank shaft sensor A malfunction brought it to the mechanic they replaced all 3 again and so far so good thanks to everyone on here i can sleep at night as of today hahah.

User avatar
kp1
Posts: 71
Joined: Sat Mar 13, 2010 9:28 am
Car: 2003 Infiniti M45

Post

at first no codes doing weeks of research i decided to change the cams and crank theres 3 sensors that i diagnosed by reading these forums had them replaced problem went away for a while then started again slightly over the last couple weeks started getting worse where my car felt like it was gonna stall everytime i drove it decided to see if there was a code for this problem since my check engine lights been on and off for over a year do to a small evap leak and boom the code pulled crank shaft sensor A malfunction brought it to the mechanic they replaced all 3 again and so far so good thanks to everyone on here i can sleep at night as of today hahah.


Return to “Infiniti M35 and M45 Forum”