hello, been a long time member here just wanted to share this crappy video i made with you guys on how to remove the analog clock to get to the back of the bulb to replace it was a spur of the moment video had to mount my phone in-between my moon roof . had replaced 2 bulbs do to not installing them properly they always popped out because of a screw head on the bulb i have never seen before i will add pics when the bulb comes in ... its probably your best interest to put a piece of electrical tape on the bulb hole after install incase it pops lose you don't lose it in your car like i have to 2 bulbs already.. these bulbs are not cheap around 20-30 bucks.. heres the video any feedback would be much appreciated hope this helps some people..
https://youtu.be/iCSgrUt77Ls