2003 350z -> oil change.. filings in oil?!

Nissan 350z / Nissan 370z general community discussion forum
Mr_GaZZa
Posts: 4
Joined: Thu Jan 01, 2009 8:34 pm
Car: 350z

Post

Hey guys,

i got a 2003 350z.. its done 50,000kmi change oil every 5-10,000km depending on driving conditions.today i droped the oil out and i noticed some small alloy looking filings? i just wanted to know why and what could it be?is it normal

ThanksGaZ


User avatar
R350Zz33
Posts: 1874
Joined: Tue Mar 25, 2008 9:19 am
Car: 2008 350z enthusiast
Contact:

Post

magnetic drain plug for now to clean them out and change ur oil every 500km like 3 times with the magnetic drain plugs just to clear out the metal.

User avatar
aris_unlimited
Posts: 641
Joined: Mon Mar 17, 2008 6:47 pm
Car: 1998 Ford F150 4.6L 5 speed. Edge programmer, 2" lift, 35" tires.

Post

Don't just try to clear out the fillings and hope that will be enough. Metal filings are very bad karma to motors. Metal filings can often enough lead to engine failure that you are going to want this looked at.

I would suggest taking it to a dealership and have a master tech look at it. Hopefully give you an idea of what is going on with it.

JETPILOT
Posts: 285
Joined: Wed Jul 02, 2008 8:21 pm

Post

Send your used oil for a used oil analysis from Blackstone laboratories. They can help tell you where it's comming from. You should do a compression check and maybe a leakdown test. You can drop your lower oil pan and look to see how much metal is is in the pan. If there is metal in there it cannot be ignored. Magnetic drain plugs don't do much except indicate if you have a problem which you know you do.

User avatar
R350Zz33
Posts: 1874
Joined: Tue Mar 25, 2008 9:19 am
Car: 2008 350z enthusiast
Contact:

Post

yea but they can also help to clear it out and stop it from recirculating in the oil causing more damage.

User avatar
evildky
Posts: 14225
Joined: Sat Jan 31, 2004 9:23 pm
Car: 71 Datsun 240ZT
87 Nissan 300ZX N/A-T
06 Nissan 350Z GT
Toyota Tundra TRD RW
Location: Louisville, KY
Contact:

Post

are the filings magnetic? if it's magnetic it could be ring, cylinder or camshaft wear, if the filings are non magnetic then they might well be bearing material


Return to “350z / 370z Discussion”