2 Fuel pressure regulator hoses

ONLY for ADVANCED technical discussion about the 240sx!
240sxkody
Posts: 11
Joined: Wed Jan 16, 2013 3:57 pm
Car: 1990 Nissan 240sx

Post

I have a 90 240sx and am just about done with my blacktop sr swap. It seems that there are two hoses that go to the fuel pressure regulator but I don't know where the second one goes to.


compactfean
Posts: 2602
Joined: Thu Dec 03, 2009 10:28 am
Car: 89 240sx s13 sr gt3071r 23psi
B14 sentra ser sr20de-t 7psi
daily
Location: reno nv

Post

Large outlet is the fuel return line, small nipple goes to vacuum source on the intake manifold.

240sxkody
Posts: 11
Joined: Wed Jan 16, 2013 3:57 pm
Car: 1990 Nissan 240sx

Post

Which vacuum source is it

compactfean
Posts: 2602
Joined: Thu Dec 03, 2009 10:28 am
Car: 89 240sx s13 sr gt3071r 23psi
B14 sentra ser sr20de-t 7psi
daily
Location: reno nv

Post

If I remember right stock intake manifold would have it right under the throttle body but it really doesn't matter, just had to be manifolds vacuum after throttle body.

240sxkody
Posts: 11
Joined: Wed Jan 16, 2013 3:57 pm
Car: 1990 Nissan 240sx

Post

Ok there's also what looks like a vacuum source or a return at the back of the mani by the firewall

compactfean
Posts: 2602
Joined: Thu Dec 03, 2009 10:28 am
Car: 89 240sx s13 sr gt3071r 23psi
B14 sentra ser sr20de-t 7psi
daily
Location: reno nv

Post

If its decent sized then that one goes too brake booster.

240sxkody
Posts: 11
Joined: Wed Jan 16, 2013 3:57 pm
Car: 1990 Nissan 240sx

Post

Ok but the hose for the brake booster isn't long enough to reach it so just get a new one

compactfean
Posts: 2602
Joined: Thu Dec 03, 2009 10:28 am
Car: 89 240sx s13 sr gt3071r 23psi
B14 sentra ser sr20de-t 7psi
daily
Location: reno nv

Post

Well it should go intake manifold up to check valve on the fire wall, then booster.


Return to “240SX Technical Forum”