yeah so my issue is when i wake up for class in the morning and start the car, it turns over first shot, but after i get to class, i try and start it again, it cranks and cranks and cranks but there is no ignition, i let it sit and the temperature gauge drops back down to 0*, it start again with little or no trouble.

I just replaced the battery, alternator, IAC, MAF, IAT. the code is being thrown for the MAP Sensor, and all the EVAP/EGR/SCV is all gone, so the codes being thrown for that are irrelevant. I wouldn't think the code for the MAP sensor would have much of an affect on the starting problem.

Anyone have any tips or pointers on what to check and/or why it won't start?

thanks again

Disconnect the ECT located by injector No.1. This will cause the ecu to use default coolant temp readings. Try starting the car. If the car starts while warm then the ECT maybe faulty and reading the engine as cold all the time. Obviously on a cold start it wouldn't be a problem, but on a hot start the cylinder maybe flooded with fuel and cause a no start condition.