Post by
DrMcWheels »
https://forums.nicoclub.com/drmcwheels-u188934.html
Wed Aug 10, 2011 4:52 pm
Hey all, this code 1320 popped up after a tune-up and a couple coils were replaced. It also turns on the TCS and SLIP lights with a code 84 in the TCS.
I then tried all 8 coils, checked the grounds near the dipstick, checked the cam-sensor waveform on the scope, made sure all the coils had a good 12VDC and ground and I checked the resistance of all 8 coil signal wires. Then I checked the condenser on the harness. I actually borrowed another cam sensor just to make sure.
The car runs perfect so it's not like any of the coils are mis-firing. It never skips a beat, just pops up the code and turns the lights on every second start after clearing both the codes in the ECM and TCS.
I'm beginning to think this thing is possessed or something but any ideas would be greatly appreciated,