Post by
drjohn »
https://forums.nicoclub.com/drjohn-u115.html
Wed Aug 07, 2002 1:30 am
The first thing to check is always the basics. Check the base idle and timing settings first. At stops if the base idle is to low it will cause the car to stall. Also remove the dist. cap and check to see if oil is in the cap or runs out of the dist. The oil slings on to the trigger wheel and clogges the slights in the wheel an blocks the led's, light- emitting- diodes, from being seen and causes intermittent igntion failure which may or may not be picked up by the ecm. Unfortunatly there is no seal kit for this dist. leak and you will need to replace the dist. if this is the problem.