1996 GTR RB26DETT Sensors

[Rob.Ellis]

I've been trying to find a list somewhere on the internet of all the sensors on the RB26DETT read by its ECU. I have found a couple sites but am not sure which one is accurate.

The first site shows only these sensors and codes:
11 - Crankshaft position sensor
12 - MAF sensor circuit (air flow meter)
13 - Coolant temperature circuit
14 - Vehicle speed sensor circuit
21 - Ignition circuit
31 - ECU
34 - Knock sensor
43 - Throttle position circuit
45 - Injector leak
51 - Ignition circuit
54 - Auto signal to ECU

The second has to many to write in this post:
http://www.skylinesaustralia.com/forums ... read-them/

I know they are fault code read outs but its the best I can find. Thanks for your help

[tyndago]

http://www.paulr33.com/diagrams/rb26-pinoutfull.htm

http://www.paulr33.com/diagrams/rb26-pinoutfull.htm

[Rob.Ellis]

The links arnt working for me. Could you try again?

[tyndago]

The links arnt working for me. Could you try again?

http://www.paulr33.com/diagrams/

[Rob.Ellis]

Thanks, this is very helpful. I'm not sure where you got this but do you possibly know of a pin layout for a 1996 300zx VG30DETT.
Thanks a lot.

[tyndago]

Thanks, this is very helpful. I'm not sure where you got this but do you possibly know of a pin layout for a 1996 300zx VG30DETT.
Thanks a lot.

I would try the service manual. US car stuff is pretty easy to find.

[Rob.Ellis]

I cant find it for some reason, every time I try to find it it's either a RB26 or some aftermark ECU pinlayout. Any I deas where I could look?

[tyndago]

http://www.auto-repair-manuals.com/Niss ... MgodOW8Adg