1995 Q45t Right Rear Spindle

[bogzilla]

I am looking for a rear-right spindle for my 95 Q45t but so far I've come up short. Reading various threads here I see that some parts between the 300ZX and Q45 are interchangeable, so I was wondering if that was the case for the right-rear spindle... might broaden my net. Also if there are other models that the G50 gen shares parts with, ever better.

Is it also the case for G50 gens as for the FY33's that for the touring model the spindle bolt is different from the standard model? Guess I can have my mechanic measure it, but as the wheels are back on I thought I might save him the trouble and ask
post6589848.html?hilit=14mm%20spindle#p6589848

Any help or hints is very much appreciated... thanks!

[3Q Jay]

rear components are different between fgy33 and g50, prolly different for z32 as well, but not sure on that.
what i can also tell you is that for 1995, nissan dropped the hicas from the t model. so your particular spindles should be the same as a base, and possibly an a car. you do have a factory rear sway which the base cars did not, however there should be no interplay with the spindles.

[bogzilla]

Thanks much for confirming. I'll keep looking and post back with the progress.