1995 nissan ultimachange the water pump

[gso1057]

how to change the water pump..any pictures would help.Thanks1

[MaximA32]

Replacing the water pump requires removing the timing chain. I wouldn't recommend tackling a job like this unless you have the tools/time/experience to do so. If not, I'd suggest taking it to a shop.

[ianh]

I suggest downloading the FSM, look here, g20Phat or Nissanforums.Also try a search in the appropriate car forum.Read what is entailed and what special tools you might need, and then you will be prepared to go ahead.Good Luck.

[driftingmy240sx]

water pump on the 2.4 is belt drive not chain driven. its a bit complicated to sneak it out past the "frame", but could be done in a driveway

[3Q Jay]

please confirm your chassis code for an 'ultima'if it's a U13, then 240 drift is correct. you will, however, need to remove the right side 'motor mount' to get proper access.i'd also recommend changing the alternator/ power steering idler pulley (it's driven by the same belt). the access to that is fairly good also after removing the mount.

[driftingmy240sx]

right on 3qjay, the p/s idler pulley always growls. and while the mount is out check it for failures as the are common for breaking.

the 95 altima not ultima is actually a L30 chassis code