1995 240sx vacuum diagram/ pictures

[jtk240]

I'm a first time poster.( sorry posted in another area)I have a 1995 240sx base model with a Ka24de.( basket case)I am needing a good diagram of the vacuum line routing. The one in the fsm does not show where all the lines go or at least I can't figure them out. I have done many many searches for this and only find the diagrams up to 94.To explain what I need;there is a plate on the passenger side ,back of the block and it has 3 metal nipples and then below that is the egr & canister control solenoid valve and that has 3 nipples. Then there is the egr valve and the bpt valve and one inlet on the end of the fuel rail ( pressure regulator).Of course there are the lines on the collector and the metal lines to the front of the collector.I need to know the proper routing for the line to all of these and I hope someone can help me out with it.Maybe a step by step.If I can get this right I can take some pictures of it all off the car and post for others.

[vancouverbc]

it should be the same or pretty similar. looking forward to the pictures. here is a start. check egr in tutorials for bpt and egr hoses.

[jtk240]

Thanks for the pictures on this. I'll look at mine and see. This site is a great help and the people and very helpful.