1993 s13 Wiring Harness Removal & Reuse Possible?

[2.4Loflove]

I'm gutting my car for a full rebuild, it needs body work in the bay so I figured I could just unplug the wiring harness from inside the car. I now have everything out of the bay except for the harness and I have the dash out of the interior and it is seeming more and more that the harness won't come out without being cut/separated from the large connectors? I searched the forum keywords "s13 complete wiring harness removal" but didn't find results. What am I missing here can someone educate me?
Thanks
Josh

[rwlesher]

You do not have to cut it. I removed all of my interior wiring as well as all of the interior while I addressed rust an put in bedliner. Although I did not completely remove the engine harness I was able to snake it out through the hole on pass side into the engine bay. I can't give you an exact run down but I can tell you it's possible without damaging/cutting.

[2.4Loflove]

Thanks, you're right I fought out the last bit last night from the drivers side. The large pinned connector barely fits through the passage hole. I have got some rust issues so I wanted to take everything out of my bay and fix it before putting my engine back in.