1991 Maxima problems please help!!!!!!!!!!!!!!!!!!!!!!!

The club for Nissan Maxima and Infiniti I30 / I35 owners, and the official home of Maxima Club of America!
jcthe1st
Posts: 1
Joined: Sun Sep 07, 2008 11:12 am
Car: 1991 Nissan Maxima SE

Post

I recently purchased a 91 Nissan Maxima V6 5spd and now I'm having some problems with it. On three (3) separate occasions, the car would not go above 1000, 2500, and 4000 rpms on acceleration. I replaced the fuel filter, rotor cap and button and now I'm stumped.

Is there anyone that has had a similar problem? I really want to keep the car because I know how reliable they are.

Here's a little info as to what happens when I tried to push the car past the rpms listed: backfires and acts as if the REV limiter is kicking in, but I don't know if this car has one.

The plugs were replaced on 9/7/08, rotor cap and button 9/6/08. I don't know what to check next. I'm an amateur mechanic and I'm stumped.

If anyone can help, I would really appreciate all the input. I bought that lovely Haynes manual and didn't help me out with this problem.
Modified by jcthe1st at 8:08 PM 9/7/2008


coolhand
Posts: 154
Joined: Wed Nov 30, 2005 8:37 pm
Car: 1995 Nissan Maxima SE

Post

Check the MAF sensor. Air leaks on the trottle body side will cause similar problems. Also, if the MAF is bad it will cause this problem.

User avatar
killakarebear
Posts: 23
Joined: Sun Jul 20, 2008 12:13 pm
Car: 1991 Nissan Maxima SE

Post

it sounds like a vacuum leak to me but u might wanna clean ur idle air control valve (need to replace gasket like $4 and local nissn dealership)other than that im stumped too good luck

User avatar
Chris93se
Posts: 43
Joined: Mon Sep 03, 2007 6:38 pm
Car: 93 Maxima SE

Post

coolhand wrote:Check the MAF sensor. Air leaks on the trottle body side will cause similar problems. Also, if the MAF is bad it will cause this problem.
maf first for sure

NutriaforBreakfast
Posts: 1316
Joined: Wed Sep 26, 2007 1:41 pm
Car: Nissan Maxima 1995 VQDE engine

Post

Check EGR valve for sticking

Check MAF


Return to “Maxima Forum & I30 / I35 Forum”