1991 240sx wiring help

[reuhzaki]

So Iv got my rb20det into my 1991 240sx. I have engine and trans harness pre made from wiring specialties. Iv got 2 plugs that come in behind the passenger headlight that don't have anything to plug into. One plug is grey and one is brown. I believe they are E9 and E10. Also a plug behind my glove box I believe is M52( rh foot lamp) and I can't find where it plugs in. I'm sorry I am unable to post pics

[93silviarbs13]

the ones behind the pass. headlight should be your power interface plugs. in my 93/rb25 thats what they are. check your harness ( engine ) and it should have a branch that runs over to the pass headlight. GL !

[reuhzaki]

Thank you for the quick reply. I will check it out and let you know.

[reuhzaki]

Ok I found the plugs in the engine bay. For the one behind the glove box, 2 plugs come from the dash harness. One I know for sure goes to the blower motor and the second one extends out another 5-6 inches. The guide says its for a foot lamp but I do not see a foot lamp

[93silviarbs13]

does your car have trim pieces?
the lamp might be mounted to one of the foot well pieces

[93silviarbs13]

also whatr does the plug look like? i know there is one that plugs into the bottom of a little motor piece on the blower motor is only a 3 pin very small plug and its difficult to see