1990/1989 240sx (s13) Cluster Problem

[Aplus240sxNProg]

Okay, to start off. I replaced the dashes in both of my 240's. I replaced the first one, the 89. My cluster wouldn't work afterwards, no gauges at all but I did get lights meaning I had power to it. I was testing the connectors and then plugged them back in after 2 hrs, and they magically started working. I bought a 90's model a few weeks back and decided to switch out my good dash to the 90 from the 89. Now I have two cars, where the clusters do not work but get power. I have checked the fuses, the ECU, and the wiring with a test light....I am down to the circuit board has some broken copper pieces near the connectors...could that be the problem? I don't want to be forced to change both clusters and find out that's not the problem...please help...everything was working fine before I did this!

any suggestions would be AWESOME!

-Amanda

[Clawhammer]

Stumped!

[Aplus240sxNProg]

Wow 3 hrs later in conversation and you are just now telling me that!!! haha