1986 nissan kingcab clutch bleeding

[86npickmeup]

Hello im trying to figure out how to bleed out my clutch hydrolick line i have a 86 nissan pick up king cab 2.4 4cylinder any suggestions are helpful thanks

[Rev_D21]

I would start by lubing the bleeders on both the slave cylinder and the clutch damper(located on the fire wall on the intake side of the engine bay). The FSM does not indicate which one to bleed first, the damper or the slave, so an educated guess says bleed the slave first. Have a friend depress the clutch pedal for you. Make sure the reservoir is full.

[camfaj]

According to Haynes manual..........bleed the damper first then the clutch slave cylinder. If bleeding the brakes, do the load sensor first then proceed with the rear brakes, etc.......1997 XE 4x4....