1979 datsun pickup help

General discussion forum about all things Datsun! NOTE: If your thread is specific to a certain model, please make sure you post it in the proper forum.
codycatract
Posts: 8
Joined: Mon Apr 19, 2010 6:14 pm
Car: 1979 datsun pickup

Post

hi i just bought a 1979 datsun pickup the motor was in it was seized so he threw a different motor in and its a newer style with the 2 coils and 8 spark plugs im new to datsuns i been workin on toyotas for a while so im getting into this i dont know if this is the right placxe to ask this but how do i use the motor with 2 coils in a trukc that only was wired for one coil thank you


User avatar
PEZi
Posts: 20441
Joined: Thu Dec 11, 2008 8:21 am
Car: Mitsubishi Lancer Evolution IX Mitsubishi Racing Edition
Location: Pikes Peak, CO
Contact:

Post

i've never seen it done before actually... i'd assume steal the wiring from the newer model? i can tell you its a Z motor most likely out of a 720... so that would narrow your search down some

welcome!

codycatract
Posts: 8
Joined: Mon Apr 19, 2010 6:14 pm
Car: 1979 datsun pickup

Post

it should work out if i just take the single coil out and run power to both the new coils though right im pretty sureit will work out ill figure it out it just weird all i work on is 22r or bigger motors lol

User avatar
Charlie69
Posts: 256
Joined: Sat Nov 08, 2008 6:01 pm
Car: 1966 Datsun 520
Location: Tolleson AZ

Post

On the drivers side of the block between # 1 & #2 cylinders just below the head is a number boss and it will be either a Z20, Z22, or a Z24. Check that let us know what you are working with Pictures would be helpful.

One coil fires the intake side plugs & the other coil fires the exhaust side plugs.

These motors were used in the 1981 to 1986 720 trucks and some cars also. Once you find out what motor it is it will narrow your search for a wiring diagram.

User avatar
PEZi
Posts: 20441
Joined: Thu Dec 11, 2008 8:21 am
Car: Mitsubishi Lancer Evolution IX Mitsubishi Racing Edition
Location: Pikes Peak, CO
Contact:

Post

codycatract wrote:it should work out if i just take the single coil out and run power to both the new coils though right im pretty sureit will work out ill figure it out it just weird all i work on is 22r or bigger motors lol
well the only problem is that the 2 coils don't fire at the same time... the intake side coils fire first and then the exhaust fire a few degrees after...

codycatract
Posts: 8
Joined: Mon Apr 19, 2010 6:14 pm
Car: 1979 datsun pickup

Post

k i went out and couldnt find a number boss anywhere there was a spot right oil pan looked like it should be there but it had nothn on it i got couple pictures but would it work if i ran the power wire to coil to the new ones or would that make them fire at same time and can i just eliminate the exhaust spark?i cant figure out how to put pictures on sorry i dont deal with computers at al

codycatract
Posts: 8
Joined: Mon Apr 19, 2010 6:14 pm
Car: 1979 datsun pickup

Post

Charlie69 wrote:On the drivers side of the block between # 1 & #2 cylinders just below the head is a number boss and it will be either a Z20, Z22, or a Z24. Check that let us know what you are working with Pictures would be helpful.

One coil fires the intake side plugs & the other coil fires the exhaust side plugs.

These motors were used in the 1981 to 1986 720 trucks and some cars also. Once you find out what motor it is it will narrow your search for a wiring diagram.
you got a cell i can send them to?

User avatar
PEZi
Posts: 20441
Joined: Thu Dec 11, 2008 8:21 am
Car: Mitsubishi Lancer Evolution IX Mitsubishi Racing Edition
Location: Pikes Peak, CO
Contact:

Post

to post pics you need to host on a site like photobucket... its easy really... make an account... upload the pic... then copy and paste the [IMG] code it offers

User avatar
Charlie69
Posts: 256
Joined: Sat Nov 08, 2008 6:01 pm
Car: 1966 Datsun 520
Location: Tolleson AZ

Post

codycatract
1. create a PhotoBucket account (it is free)
2. upload your pictures from your computer to your PhotoBucket it is easy.
3. Once you have your pictures on your photobucket account then Left click on [IMG](in the drop down menu under your pictures) which will highlite he "Image Code" to the right of the [IMG] (it will be highlited in Blue)
4. Right click on the blue "IMG Code" choose "Copy"
5. then paste it into your post on Ratsun.

This requires 2 windows open Ratsun & PhotoBucket.

PhotoBucket link to create account (Register)
http://register.photobucket.com/

codycatract
Posts: 8
Joined: Mon Apr 19, 2010 6:14 pm
Car: 1979 datsun pickup

Post

Image
Image
Image thank you well here is what i got i can take more tommorrow to help ya more :facepalm: i posted it on ratsun to

User avatar
PEZi
Posts: 20441
Joined: Thu Dec 11, 2008 8:21 am
Car: Mitsubishi Lancer Evolution IX Mitsubishi Racing Edition
Location: Pikes Peak, CO
Contact:

Post

its either Z20 or Z22... i wanna say Z22... definitely not a Z24 though

codycatract
Posts: 8
Joined: Mon Apr 19, 2010 6:14 pm
Car: 1979 datsun pickup

Post

willz22 bolt up to stock 79 transmission ?

User avatar
Charlie69
Posts: 256
Joined: Sat Nov 08, 2008 6:01 pm
Car: 1966 Datsun 520
Location: Tolleson AZ

Post

Yes but the transmission will be turned becase the Z motor leans to the right & the L motor leans to the left.


Return to “Datsun Chat”