17x9, wiil they fit

[esahuque]

i'm looking at a set of new rims for a s14, 17x9, 35mm offset. will they fit front and rear (i'm thinkin the front might not clear the brakes) and if so will they sit flush. that"s the look i'm lookin for.

[Dookie]

Theyll fit, but theyll be far from flush.

[nismofly]

id give you a slim chance of clearing in front on stock suspension...and if you have coilovers theres no way

[esahuque]

this is the look im goin for, how can i fig out the correct measurements to get this look, s14 1.7 drop.

[whiterps13]

Maybe look in the thread that J-Z posted?

[esahuque]

this is how it sits now, i hate it 17x7 40mm

[nismofly]

youd be looking at probably a 1 inch spacer to get 17x9 +35 to fit like that, maybe a little less

id say look for different wheels

[esahuque]

so i should be lookin for 17x9 25mm offset, maybe i guess

[EazyBreazy]

see sig 17x9+15's. they don't require the pull i have, but i'm gonna be getting 17x10+12's. for flushness like jz, you will need a fender roll, 17x9+15 will require that and you should clear

iirc jz is running 10's or 11's in the rear

[whiterps13]

zerothread?id=201115

Theyre 17x10's.

[nismofly]

but he doesnt know the offset

if i had to guess though thats around +15

[esahuque]

i read jz's form and yes it didnt tell me the offset and thats what i was lookin for, thanks for all yalls help. (yalls, down south for- you all) just kiddin!!

[Bosrudorfer]

Phhff they will fit, I had 17x9 +20 with no roll or pull. I got roll in the rear months later.