1/8 n/a times?

[randybunctious]

hey i would like to know how you all motor guys are doing in the 1/8. i got a 10.4 with a clutch on a stock ka24e and my friend got a 10.2 with a clutch on a stock ka24e with lsd

[Sxse240]

I run a 10.3 to 10.4 with a ka24e that has 214k on it bald tires and uhh mods are, i cut my airbox in half, and well i have good plugs and wires but they dont do anything anyway..basically stock and beaten up too. Rwd is good at the track.

[Aries]

KA24DEstock my car did 10.5 as an auto.I/H/E Porting, freemods, milled head, forged pistons, eagle rods, and a 5 speed auto netted me a neat little 9.3

And on Nitrous it was a 7.9

[93Twiztid240]

I was running 10.6 bone stock 5-speed on our local 1.8th. I only made a few runs. I am going back this friday with all my mods and seeing what I can get. but 10.6 is high compared to you guys times. They seem really low..... maybe our track is just crap and needs to be resurfaced.

[daniel240]

ran a 9.85@71 with i/e/h on street tires in 100deg temp. then ran 9.71@72 after pulley, comp. chip, short shifter, and better tires. cant wait to see what i run with my new stage 3 clutch.

[piratepete]

2.300 60' with a 10.001 1/8 and a 15.47 @ 91 1/4

[TrueSlide]

10.5 all stock

[harryhood]

10.398 with too big exhaust and short shifter

[Nismo_Freak]

10.29 @ 69.92 w/ I/H/Ex, ECU, and free mods. Not to mention a 2k launch that bogged. I got a 2.389 60'

[Cookdaddy]

WTF?? My s14 is an auto too, with CAI and I ran a 10.9, but I trapped at 66 MPH. How in the world did you run a 10.5 Aires??

[red240ne]

And on Nitrous it was a 7.9

Jesus that's a lot of N20!!!!

[gibbo80]

what are some of these in the 1/4

[HolyShiznit]

http://www.mindspring.com/~bbarb1/timeslip1.jpg