1/4 mile times

[tvmendoza]

Hello everyone, i want to know what will be the common time on a KAT, i know it depends on what are your mods, but what will be an example, or if you guys want to what time does your cars do.thanks

[fabio420]

With stock injectors, a T3 .42/.48 turbo, .5 sec reaction time and 3/4 tnak of gas I ran a 14.6 (only got 1 run in). With upgraded injectors and MAF shoul be in mid-low 13's

[HolyShiznit]

^^^ Reaction time have nothing to do with quartermile times so no point in posting it whatsoever. Your sixty-foots (60') is what really counts.

[Florida240sx]

Yea I told him that in they other thread.But still having a .5xx reaction time is awesome. Bragging rights if your new to scene.

[tvmendoza]

Well, i think the 60ft is the first 60ft on the 1/4 which is where you slip, but that depends on the driver and i want to know times. Also correct me if i am wrong about the 60ft.

[Florida240sx]

Well, i think the 60ft is the first 60ft on the 1/4 which is where you slip, but that depends on the driver and i want to know times. Also correct me if i am wrong about the 60ft.

Not quite understanding what you are saying...Yes the first 60 ft, your more prone to spin your tires because you'll be in first gear and going through rpms so quick.

[fabio420]

OK 60 ft time was 2.414 sec.

[tvmendoza]

Not quite understanding what you are saying...Yes the first 60 ft, your more prone to spin your tires because you'll be in first gear and going through rpms so quick.

That is exactly what i tried to say. hahahah, anyone else who wants to share 1/4 times. Thanks

[XcreatureX]

lol not turbo yet but ill share...

all stock besides intake

60' 2.4571/4 15.845 @87.16

thats pretty much stock with open diff and not the great of tires

its a good base so when i get turbo'ed i can see the differeance, that nad get a LSD thats killing me right there lol

Seth

[Structure240sx]

best so far, soon to be better

60' 1.9921/4mi et 12.433mph 119.64

[Florida240sx]

Where's your setup at structure?

[veilside180sx]

ka-t.org/anthony

[:: orion ::]

13.3 @ 110mph

That was at 12psi (298rwhp), with an easy launch. The trap speed is nice, but the E.T. could be lower (easily in the high 12s) with a lower 60' (easy launch = 2.25 60' time).

Did 13.6 @ 104 with a better launch back when I was at 8psi (~248rwhp).

- Brian

[HolyShiznit]

13.3 @ 110.2, 2.2 60' street tires/full interior/8.7psi

12.7 @ 110, 2.1 60' street tires/full interior/14.7 psi clutch gave out after that one run, spun up to 3rd while clutch was slipping

New setup numbers.....coming.

[240slidekat]

13.4 @ 106mph on a sohc ka-t stock tires, full interior, 91pump gas 10psi

[ultimatuc]

fwd13 psi

[240slidekat]

fwd13 psi

nice times, whats up with your reaction time? were you sleeping? were you on slicks? damn i cant wait till im part of the 12 second club.

[HolyShiznit]

^^^ Most people that go to drag race dont' care about reaction time. My reaction times are horrible because I am paying more attention to my launch than reaction time.

Keep posting up the times guys.

[Structure240sx]

so many people that talk to me say "oh my reaction time was so bad" or "im so proud of my reaction time"

then they dont seem to get it when i tell them it doesnt matter for your et

[veilside180sx]

Agreed, but at the same time...if you really are racing the person next to you it matters. No fun to look like a fool, still sitting on the line when the other person is almost done.=)

Although most of the time, everyone winds up so unequally paired that it doesn't make a difference anyway.

[HolyShiznit]

^^^ Yep happens to me everytime. Either I am next to some 9 second Camaro tube chasis or a SOHC turbo honda.......either way I could grab a beer in between the time it takes for one car to start and the other to finish.