1/4 mile times s-13 with rb25det swap?

[hpfreak]

just wondering what stock rb25det in a s-13 will run in the 1/4 mile??? just wondering what i have to look forward to

[nizmo zilvia]

Depends on how good you drive. Ive seen low 13s to mid 14s. How good are you is what your going to ask.

[RBMonster]

just wondering what stock rb25det in a s-13 will run in the 1/4 mile??? just wondering what i have to look forward to

[the_momo]

anywhere between 8's and 17's, depending on your rim size.

[DETurbine]

I ran a 13.6 with 8psi with nothing other then exhuast, downpipe, and some fried 225 drag radials.....that was even with the stock smic. 60ft on that was a crappy 2.2 .

[Cpt_Impossible]

http://www.240sxforums.com/for...86260

there are many threads about qtr mile times

[safxtacy]

EDIT-OOPS

[rustbucket]

13.6 @ 107, spinning through 1st and 2nd with a second hand set of bfg drag radials 26x8x15's. FMIC and pretty much no exhaust with waste gate operating off of manifold pressure. Hoping to pull high 12.7s with stock shocks, battery relocation, and boost controller.

[89'burgandyFB]

i saw one go 12.7 on drag radials. all i know is that it had a fmic and thats it

[gomer23]

I went to our local 1/8 mile a couple weeks ago (ya it sucks but closes 1/4 is now 3 hours) I mainly went to practice a little bit. Only ran a 9.5 @ 75mph. This is on stock almost bald 205 tires, 5lbs of boost (on Turbonetics 50trim) and AFRs at around 10.5. I will be looking to bring that down ALOT here soon i hope haha.