Hey everyone...

I have a problem with a wire on the E41 connector, part of the wiring harness that goes from under the hood to the cabin. I've checked continuity with a multimeter and verified that one of the wires is fine throughout except at the connector itself.

Does anybody know the easiest/best/correct way to take this type of connector apart so I can try to repair this? I don't want to start pulling on things and break anything



http://gallery.me.com/viguera/...b.jpg

Thanks

Make sure of what you're doing. Not every connector needs to have continuity, voltage or draw. Its a complicated CAN system. To take apart any SMJ on an infiniti, you may want access to special tools.