05 350z Timing / Engine Swap

Post by **cajuncustoms** » Thu May 26, 2022 6:50 pm

Original Harness

Post by **cajuncustoms** » Thu May 26, 2022 6:51 pm

Harness i bought

Post by **cajuncustoms** » Thu May 26, 2022 6:51 pm

so different part numbers im very curious as what wires are different

Post by **cajuncustoms** » Thu May 26, 2022 6:54 pm

hrmm both these part numbers are the protector for the harness from what im finding and there were no other numbers

Post by **cajuncustoms** » Thu May 26, 2022 7:03 pm

ok so i found this picture on a harness that was for sale , i know where this location is , on the harness i bought that tag is gone , on my harness thats where the dogs ate it , so is there another way to find the correct part number ?

Post by **VStar650CL** » Thu May 26, 2022 7:22 pm

Assuming the engine is original and didn't get swapped before you bought it (omfg if that's the case), you can go to NissanPartsDeal.com and plug in the VIN. NPD is a consortium of Nissan dealers and their dbase and drawings are the same as Nissan EPC that a dealer uses, so whatever p/n you turn up is guaranteed to be what the car was built with. Nissan calls their engine harnesses an "EGI Harness", so if you search EGI it should pop right up, along with a couple sub-harnesses for the same engine.

Post by **cajuncustoms** » Thu May 26, 2022 7:39 pm

i think this is the correct one its called engine room harness

Post by **cajuncustoms** » Thu May 26, 2022 7:40 pm

Nissan 24012-CD210Harness Assy-Engine Room

Post by **cajuncustoms** » Thu May 26, 2022 7:42 pm

it says 2003-2006 Nissan 350Z 24012CD210

Post by **VStar650CL** » Thu May 26, 2022 7:57 pm

Nope, you need EGI and not Engine Room. Engine Room is the "E" Harness in the WD's, EGI is the "F" Harness. The right one should have a 24011- prefix. For most Nissan parts, the first five digits represent the type of part, the last five represent the version and what it fits. EGI harnesses are 24011's.

Post by **cajuncustoms** » Thu May 26, 2022 8:11 pm

got ya Nissan 24011-CD810Harness Assembly-EGI
2003-2006 Nissan 350Z 24011CD810

Post by **cajuncustoms** » Sat Jun 04, 2022 12:26 pm

VStar650CL wrote: ↑
Thu May 26, 2022 7:57 pm
Nope, you need EGI and not Engine Room. Engine Room is the "E" Harness in the WD's, EGI is the "F" Harness. The right one should have a 24011- prefix. For most Nissan parts, the first five digits represent the type of part, the last five represent the version and what it fits. EGI harnesses are 24011's.

Thanks for the help on this , crossing my fingers think you might have figured out my problem , ordered the only harness on ebay with the correct part number , installed it today , fired right up sounds fine , no check engine light , i reved it multiple times no light , cant move it atm getting ready to replace the suspension but i think this might have been it. Thanks alot

Post by **VStar650CL** » Sat Jun 04, 2022 12:30 pm

You're most welcome, glad you got it straightened away. Happy motoring!

05 350z Timing / Engine Swap

Re: 05 350z Timing / Engine Swap

Re: 05 350z Timing / Engine Swap

Re: 05 350z Timing / Engine Swap

Re: 05 350z Timing / Engine Swap

Re: 05 350z Timing / Engine Swap

Re: 05 350z Timing / Engine Swap

Re: 05 350z Timing / Engine Swap

Re: 05 350z Timing / Engine Swap

Re: 05 350z Timing / Engine Swap

Re: 05 350z Timing / Engine Swap

Re: 05 350z Timing / Engine Swap

Re: 05 350z Timing / Engine Swap

Re: 05 350z Timing / Engine Swap

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums