Pictures of +35 wheel offsets

[truckmtr240]

I am interested in purchasing some 17inch wheels with around a 35mm offset. Im just looking around at how this offset might look on the car. I have a 91 240 hatch. I ride on kyb agx suspension. I was having some trouble finding any pictures, and any would be appreciated.

[ILoveMyRHS13]

First off, how WIDE of a wheel?Second. No.Third, they'll rub your sweet-tastic strut/spring combo depending on width.

[truckmtr240]

Im looking at 7.5-8inch wide. I dont want coils at the moment.

[OutToWinPAHC]

17x9+35 on the rear.

Mounting some 285/40/17s on them soon.

These are with 245/40/17s, not in or out, will stick out some with the tires an +1.5 degrees on the rear.

[truckmtr240]

Thanks for the pic. I like that look.

[OutToWinPAHC]

A 17x9+35 will fit a wide 275-285 all day and still allow you to dial in a little camber with a simple hammer / rolled lip, no pull needed.

[truckmtr240]

Yeah I dont know if I could get away with going with a 9in wide wheel. I only have a ka, not an LS haha

[OutToWinPAHC]

9's are common. But a 9inch in a +25 to 35 fit pretty good with a decent tire. If you want a stretched tire and more negative camber go with a lower offset and like a 235-225 tire.

[Cody240]

17x9+35 on the rear.

Mounting some 285/40/17s on them soon.

These are with 245/40/17s, not in or out, will stick out some with the tires an +1.5 degrees on the rear.

not trying to thread jack but what exhaust is that I love dual exhaust

[OutToWinPAHC]

Custom its a LS swap car.

[Hooked on 240]

Been

Custom its a LS swap car.

following your car for some time now. i freaking love it.

I remember that vid a while ago when you first swapped it, open headers no panals and one wheel warrior haha.

[AAV240sx]

Here's what 17x9 +35 looks like on a red car.

[driven_]

Here's what 17x9 +35 looks like on a red car.

17x9 +35 for front too?any pull/roll?

[Black on Gold]

Been following your car for some time now. i freaking love it.

I remember that vid a while ago when you first swapped it, open headers no panals and one wheel warrior haha.

Remember that too. black S15 front, steelies and 4x4 status

[AAV240sx]

17x9 +35 for front too?any pull/roll?

That's just the rears. The fronts have 17x8 +30. Fenders are slightly rolled all around.

[truckmtr240]

Thanks for the pics. Any more?

[Xdisaster240sX]

most rims, most sizes.

http://www.rimtuck.com/thumbna...age=1

[truckmtr240]

Hah you mean most crazy offsets, body kits, and spacers/rolling/pulling

[Future_gohan]

dude if your offset isn't in the negs its not worth buying. -_-

[truckmtr240]

How do you figure?

[OutToWinPAHC]

Kinda like these? or these

[Future_gohan]

lol you honestly wasted your time with that? Rims came with my car and the 18's are +15

and besides both those rims are lower then +35.

[Black on Gold]

dude if your offset isn't in the negs its not worth buying. -_-

[OutToWinPAHC]

But they are not negative, so did you waste your time?

You made the statement, I merely pointed out an observation based on what you stated.

[Future_gohan]

But they are not negative, so did you waste your time.

You made the statement, I merely pointed out an observation based on what you stated.

No. I didn't purchase either rims. Both sets came with my car.

If I purchased a set of rims that were not burnoffs, they WOULD be in the negatives. So my statement holds true.

[truckmtr240]

True to your opinion only. I don't need negative offset?! +35 looks great on lots of cars.

[OutToWinPAHC]

IMO a +25-+35 on a 9-10inch wheel with a square or beefy tire fit nice.

Depends on your personal and drying styles. A 17x9 or 9.5 +30's fits a 275-295 damn well without pulling a fender.

[Razi]

dude if your offset isn't in the negs its not worth buying. -_-

What an ignorant statement.

[Black on Gold]

What an ignorant statement.

Atleast someone shares the same opinion.

[AAV240sx]

Thanks for the pics. Any more?

Yeah, here's a couple more of mine for you.