New look engine bay.......

[kentuckyslider]

Got my old mani & o2 housing going out for swain coating and a freddy intake getting powder coated gloss black? Should I do matching candy red on the mani or balck? I'll have a dyno sheet on November 1st with new intake, tomie procams, and 24psi.

[snake240]

nice

go with black on that mani

[Sabot]

nice

go with black on that mani

black

[positron1]

Very clean! Question, what size hose fittings and hose do you have on that T-fitting on the valve cover?

[Kalypso]

nice

go with black on that mani

No!

overall it looks a lot nicer,

[kentuckyslider]

Very clean! Question, what size hose fittings and hose do you have on that T-fitting on the valve cover?

-12 an earls line from summit and -12an fittings. they fit perfect on 15mm fittings. I was supposed to get a CS small catch can from mysr20.com but they forgot it and a 2.5-3" coupler for my intake pipe. The CS catch cans have 15mm fittings also. That and a BMC heat shield is on it's way.

[Kalypso]

strut bar?

you should get some altima fans,I got mine from a junk yard for 17$

... but its not necessary.

[kentuckyslider]

Kalypso123, No on the powder coated intake, or no on black for the color?

[sr20deTsomeday118]

no on the black color. black is a heat soak. things are hot enough in there

[RPS13 DRIFTER]

kentuckyslider i want your setup for drifting,i know you have the gt2871rs with the .64 exhaust what injectors and rom tune do you have?,also how is turbo response?

[ryan15]

What kind of maf is that q45?

[kentuckyslider]

All JWT setup......... 72lbs injectors, ford cobra maf, and JWT rom tune. It maxes out at 475 whp with the cobra maf and 72lbs injectors. The injectors are = to tomie 740cc. Also walbro fuel pump, fpr, and jgy top feed fuel rail. I have a fully built bottom end with 86.5 arias pistons, eagle H-beam rods, acl bearings, arp head and main studs and rod bolts. Installing cams and doing a dyno run at 24psi next week. Hoping for 380+whp with stock intake and 340+ tq. That's with a 4.36 R&P.

[RPS13 DRIFTER]

will 550cc innjectors support 350 wheel with a 2871rs?

[Emperor_Tha]

is that s13 hot pipe with a t25/t28 adaptor? Request more pictures

[kentuckyslider]

is that s13 hot pipe with a t25/t28 adaptor? Request more pictures

No, it's a standard Gt2871R with a 3" inlet and 2" outlet not the SR bolt on. It has a 90 deg elbow from jgy with 2" hoses. Greddy rspl FMIC.