Post by
fayceoff »
https://forums.nicoclub.com/fayceoff-u38054.html
Fri Jun 01, 2007 2:14 am
Alright, here's the deal: I have an '89 hatchback with 215k on the odometer that I bought for $250 because the guy's son ran it hot and blew the headgasket. I purchased a replacement KA24E from a local guy for $200 and put it in, along with some Altima fans which I Sawzall'd and Dremel'd to fit and hard-wired a toggle for them. It now runs okay. The body (while not beautiful in any way other than the fact that it's a hatch) is sound and the frame is straight and both are mostly rust-free. A while ago, I saw 180sxfaktory's post about putting a VG30DETT into an S13 and contacted him via e-mail. He's in the Navy, stationed in the Middle East and he has strong ties with a shop in Bahrain, where that work was done. Recently I was transferred from New Jersey to Bahrain and I decided to bring my car with me and have the VG30DETT swap performed. The car is here and I'll be picking it up tomorrow (June 2nd) and taking it to the shop to get started. I've already put down a deposit on a Z32 front clip, which should be here in about three weeks from Malaysia along with my S15 seats. Here is my detailed plan for the car and some "before" pictures. An "X" denotes something that's already done. DISCLAIMER: I know that some most of you guys will say that some of the things I want to do are 'rice' (the door conversion) or 'gay' (leaving it "auto-tragic"), and to you I say you are welcome to your opinion, but this is my car, I've put a lot of thought and research into it, and I have my reaons for wanting to do these things. I promise you I will not make you pay for anything or force you to drive my car, so feel free to keep flaming to a minimum. However, if you have a constructive idea or suggestion, by all means, share! I am not set on most brand names - if you know of something that works better than something else, please tell me what and why. So without further ado - here is the very beginning....
PROJECT: MAYHEM FAIRLADYSXEngine__ Engine code – VG30DETT__ Engine type – Nissan Z32 3.0 Liter, V-6, twin turboX* Nissan Altima electric cooling fans w/dual fan controller
Transmission__ Nissan Z32 4-speed automatic w/custom drive shaft__ Level 10® rebuild kit (torque converter, valve bodies, & seals)__ Twist Machine® paddle shifter__ Nissan Silvia (S15) helical limited slip differential
Suspension__ Suspension Techniques® sway bar set (front & rear)__ Energy® polyurethane bushings (red graphite embedded)__ KYB GR-2® adjustable shocks/struts with Eibach Sportline® springs
Brakes__ Z32 conversion (front and rear including e-brake)__ Stainless steel braided brake lines__ Slotted rotors
The motor after it was replaced...
Couple of exterior shots...
Manual Seatbelt swap - I couldn't stand the automatic one's; for some reason they really irritated me!
The Altima fans after being cut to fit...
I got bored - took all the paint off and painted the letters blue - see above pics...
Couple of interior pics, excuse the dust, they were taken as I was cleaning... ****Update 4June07****So... I pick up the car from the vehicle shipping place and take it to the Ministry of Traffic and after inspecting it, they say they won't register the car because of the two rust holes in the frame. They say even if I have the frame repaired, it's still considered unsafe. Dale from 180SXfaktory says that's crap and that he'll help me get it fixed and then take it to 'his guy' and get it inspected. Honestly, I don't care if the car is illegal here as it looks legal and I'm able to drive it at least sometimes as it's being brought around to my vision, I'll be okay. I can buy an island beater and sell it when I leave here. So, the car will be towed to the faktory this evening and we'll go from there.
****Update 9July07****Got word from Dale today that the front clip has cleared Customs and will be delivered to the shop the evening of 10July (tomorrow). I asked him to take pictures of it because I only have one and it's of the exterior, so hopefully I'll be able to add those pics to the thread. If not, I'll be back over there Thursday and I'll go to the shop this weekend to help out and take pictures.
Also, the ostrich leather I ordered came in today, and I feel a little violated. Guess I need to take geometry again, because I thought 8 square feet would be about 50% bigger than the piece I got. I suppose that explains the low price... Ah well. I'll get more.
Modified by fayceoff at 1:09 PM 8/6/2007