Turbo Adventures ( my turbo and others)

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
User avatar
Biggamehit
Posts: 1236
Joined: Sat Jan 29, 2005 10:13 pm
Car: R33 Skyline
DR30 Skyline
Sil80
180sx
Location: Japan
Contact:

Post

Last week i found a H1C on eBay that i was looking for when i built my turbo kit last year. To my luck not only did i find it, but the shop was located in Rockville MD. I talked with the owner of the company and he allowed me to come check it out before buying. The turbo was as described, " zero shaft play no leaks etc". He also allowed me to browse through his shop freely and was very excited to show me his latest turbos that had Zero miles on them etc.

This shop houses EVERY holset ever made (H1C,H1E,H2C,H2D,H2E,HX30,HX35,HX40,HX50,HX55,HX60,WHX80,HX82........... SOURCE) and many OEM Garrett chargers. some are rebuilds/parts only. some are in fair to new shape. many of the BIG ones power Detroit trucks, Earth Movers, Marine equipment etc.

they are great project turbos for DIY guys/gals and cost way less then the leading brands and are the same quality and better in some aspects. many of them that you see in the pictures that can actually fit in our cars without major modification are mainly T2,T3 and T4 flanged with either 4/5 bolt and v-band turbine outlets. for the most part you can use standard feed and return oil flanges. some are threaded for use with banjo bolts. It takes minor modification ( drilling, tapping, converters etc) to make them work

below are pictures of the shop and my turbo

all being shipped todaycould place 1 1/2 Razors inside of it





T2 flanged ( bigger then z31 T3)





superchargers

MY turbo

TURBOCHARGER MANUFACTURER: HOLSET #765TURBOCHARGER PART # 3522900TURBOCHARGER MODEL # H1COIL COOLEDWEIGHT: 19EXHAUST WHEEL DIAMETER - 60mm.COMPRESSOR WHEEL DIAMETER - 45mm.

I did the math for the trim and came up with 56 but that was just with the numbers given, i really want to measure the size of the inducer and exducer and get the proper number for both sides.







spotless, had you basic sludge from use, but no broken parts or blown seals ( most of the oil spots came from my fingers)









travisn
Posts: 949
Joined: Wed Mar 10, 2004 11:34 am

Post

jdm green ftw...lol

User avatar
srpowered240sx
Posts: 12661
Joined: Wed Jun 29, 2005 1:17 pm
Car: 90 240sx-sr, 92 F-150, 00 bmw 323ci, 1991 s13 coupe, 99 F250 Dsl

Post

hell yeah dude. that place looks like fun. go back and stick a couple of turbos in your pocket for me.

User avatar
Biggamehit
Posts: 1236
Joined: Sat Jan 29, 2005 10:13 pm
Car: R33 Skyline
DR30 Skyline
Sil80
180sx
Location: Japan
Contact:

Post

HA HA HA

" its just my pen15 sir, don't mine it"

lol

that guy had an nice looking assistant. she was Korean i believe.

User avatar
95.240AZN378
Posts: 801
Joined: Sun May 07, 2006 2:39 pm
Car: VW

Post

Biggamehit wrote:HA HA HA

" its just my pen15 sir, don't mine it"

lol

that guy had an nice looking assistant. she was Korean i believe.
just walk it off!!!!

User avatar
Biggamehit
Posts: 1236
Joined: Sat Jan 29, 2005 10:13 pm
Car: R33 Skyline
DR30 Skyline
Sil80
180sx
Location: Japan
Contact:

Post

LMao..

he has an baby saab turbo it was sooo cute awwwwwwwwwwww

gbaz77
Posts: 190
Joined: Mon Mar 27, 2006 5:56 pm
Car: 240sx

Post

hey, where in rockville is that?? im in columbia maryland. can you email me?

[email protected]

gamay

User avatar
Biggamehit
Posts: 1236
Joined: Sat Jan 29, 2005 10:13 pm
Car: R33 Skyline
DR30 Skyline
Sil80
180sx
Location: Japan
Contact:

Post

info here

Goldfarb and Associates11822 Coakley Cr.Rockville, MD 20852301-770-4514Brant

http://stores.ebay.com/TURBOCH...CTION

http://www.midatlantic240sx.co...c.com


Return to “240sx General Discussion”