17x9+22 rediculous on s13?

[tyrannix]

i was looking for 8s in the front ant 9s in the rear, but found a set of 17x9 all around +22, im probably going to run about a 5mm spacer in front (they are advan sar3s, and need to fit over 28mm z32s)

just getting started on wheel math, will these stick out or rub coilovers (2 deg neg camber on front)

sets ive found1. 17x9+22 x4

2. 17x8+35 x2 17x9+38 x2

3. 17x9+42 x4

all super advan racing 3s

trying to wrap my mind around which set will fit and not look rediculous

[onosqv]

x9+22 will prob rub in the front w/o spacers.

They are not crazy tho, it's still conservative (relatively). All you need to do is roll your fenders.

And there are no 28mm z32 calipers, either 26 or 30 - you should clear both w/ advan rims anyway.

I'm running 18x9 +20 all around (or was), was fine. I also ran a slightly stretched tire (225/40).

[McRussellPants]

17x9 +22 will be fine unless you have Zeals.

Fender roll only.

[chmercer]

(or teins)

but yeah get the 9j +22

[Juujai]

the 17x8 +3517x9 +38 will possibly almost flush with near 0 camber but front may not clear coilovers.

the 17x9 +22 will require camber but it'll look better

17x9 +42 will not clear coilovers at all and sink in pretty disturbing

[daOne]

what about 17x9 +20 all around with teins, will they rub? thanks

[chmercer]

should be fine, yes.

[tyrannix]

17x9+22 s are probably what ill go with then, btw i have Tein HAs

i run 1.5 - 2 deg negative camber on front, 0 rear

what would i 'need' to run camber for it to fit, rubbing coilovers? or just to make it flush?

i heard i would need about a 5mm spacer with SAR3s to get z32 fronts to fit (they are 26, not 28, crack smoking)

[onosqv]

Why are you running zero camber?

Our tires & cars are made to run w/ negative camber - your handling will be horrible w/ zero camber in the back.

On my x9 +20 w/ 225/40 tires - in the rear, I rolled fenders (no pulling) set to -2 camber, and the top of the rim is "flush" w/ the fender.

Front you should be flush w/ ur current setup.

About coilover rubbing, w/ a 5mm spacer you should clear just fine. The rears are fine as is.

However, I don't think you have to run a spacer to clear zbrakes... coilovers maybe, but not the brakes w/ those rims.

[nismofly]

17x9 +20 with a 235/45/17, front and rear slightly pulled/rolled, about as wide/stretched as i would go if i got looks wheels

not sure what hes running camber wise, just pulled that info from his thread

[naed240sx]

17x9 +42 will not clear coilovers at all and sink in pretty disturbing

That would not be sunk. It would stick out 1.5" farther than stock s13 wheels, but definately would not clear as you mentioned. Not sure why everybody thinks that +40 is automatically sunk. Do you think that a 17x12+40 is gonna be sunk too?

[McRussellPants]

That would not be sunk. It would stick out 1.5" farther than stock s13 wheels, but definately would not clear as you mentioned. Not sure why everybody thinks that +40 is automatically sunk. Do you think that a 17x12+40 is gonna be sunk too?

Anywheel with a 42 Offset on a 240 is either gonna be sunk... or not clear.

If it doenst clear the shock it is instantly irrelevant.

I award your post zero points, and may god have mercy on your soul.

[naed240sx]

Im gonna make a U shaped suspension delete piece so that I will have more clearance, and run a 17x9.5 +40 and be nice and flush

[nismofly]

mines not jDm Dor1ft0 tYte flush...but its lined up with the fenders

outside sticking-out wise mine would be 17x9 +41, at 17x7.5 +22

[tyrannix]

so the 17x9+22s somebody else already put a deposit on, so im looking at

17x8+35 17x9+38 now, say i run 2 deg neg camber, i should be fine with teins and look ok with that? (possibly needing a 5mm spacer for either z32 brake or coilover clerance on the front)

once i find the weights ill probably order them up

[sixxdeuce]

Im gonna make a U shaped suspension delete piece so that I will have more clearance, and run a 17x9.5 +40 and be nice and flush

maybe if you use 25mm spacers......................

[ale89se]

do you have any pics of your car with these wheels?

Why are you running zero camber?

Our tires & cars are made to run w/ negative camber - your handling will be horrible w/ zero camber in the back.

On my x9 +20 w/ 225/40 tires - in the rear, I rolled fenders (no pulling) set to -2 camber, and the top of the rim is "flush" w/ the fender.

Front you should be flush w/ ur current setup.

About coilover rubbing, w/ a 5mm spacer you should clear just fine. The rears are fine as is.

However, I don't think you have to run a spacer to clear zbrakes... coilovers maybe, but not the brakes w/ those rims.

[hannibal]

Here are 2 S13s with 17x9 +20 FN01RCs...http://www.splparts.com/Parts/...G.htm

Also that black hatch that nismofly posted has the same size Falken Harabi wheels...

[ale89se]

thanks for the pics. i just wanted to see these in particular cuz they are the ones i think i might get!

[240doubledrive]

Hey guys, what about 17x9 +35 in the rear and 17x7 +38 in front with tein springs in my s13? Would that work? Also what size tires for I get?

[whiterps13]

Hey guys, what about 17x9 +35 in the rear and 17x7 +38 in front with tein springs in my s13? Would that work? Also what size tires for I get?

that will fit, but the fronts will be hella sunken in. i suggest you search for "s13 offsets" and start reading. you will find more information than you should need to make a smart choice on wheels.

[240doubledrive]

what do you mean by sunk in?

[180fan]

Ha ha ha Var's pinky's posted up ha ha ha

[ale89se]

Ha ha ha Var's pinky's posted up ha ha ha

do you know what size tires he's running in the two pics?