Recently I have had allot of requests (people digging up old threads on the web) for me to make these. So I got all tooled up, made about 5, and have material for maybe another 20 then I am done.
Check it out!
I also wrote an illustrated instruction manual on using the tool, and Nissan OEM p/n look up in the book. A couple people had to wait weeks while I sourced material, but I have it all in hand now.
I will also leak the Instruction manual for a few days:
Right Click and Save As
http://www.rpsport.net/support...s.pdf
Thanks!
John
John@RPSport.net
Modified by johngriff at 12:46 AM 7/1/2009
Post Title: Re: SR20 Valve Shim Height Tool (johngriff)
Posted by: johngriff at 4:18 PM 7/1/2009
I will do the first three for Nico club members for $110 + $10.50 shipping. The only thing you have to do in return is do a small thread of your own on setting your valve shims, and link back to RPSport.net in it. Here on nico, and a regional forum would be awesome too!
RPSport is innovative, but a super small company, so any help we can get exposing our new products the better.
Use THIS LINK to take advantage of the Nico Member Special, it is set so that only three are in inventory, and once those three are gone, this link will no longer work.
Thanks everyone!
Post Title:
Posted by: johngriff at 2:31 PM 7/2/2009
Post Title:
Posted by: BaliLover at 8:01 PM 9/6/2009
John
< Contact Us - NICO
>
Visit G37Driver.com for Infiniti G37 Information
NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan Motor Company or Nissan North America.
Information © Copyright © 2000-2009 by NICOclub
All rights reserved. Material may not be copied or reprinted without written permission.
Visit 370zclub.org for Nissan 370z Information