To give you a little background, I do powder coating on the side for fun. I do the painting out of my buddys garage. I've been coating since October so Im still new at this but pretty much have the hang of it.
To give you a run down of my prices for valve covers I usually charge a $15 per cylinder fee so 4 clynders are $65 Shipped. But the more cylinders the cheaper it will be. These prices are usually for Single Stages, Multiple stages are $10 extra which require a Base Coat and Top Coats.
Im very flexible on prices so if your on a tight budget I can work with you to try and get you covered.
I do offer warranties on the coatings which is 60days.
Because I do this for fun/side I only powdercoat on certain days, which are Tuesday, Thursdays, and Saturdays. I try to get them done as soon as I can but since I work at another job I may sometimes be called in. But I'll try to get everything done in a timely manner usually within the week of arrival.
Just a few examples that I've done in the past.
These are single stages, they vary from wrinkle, to mirror gloss, flats, etc etc.
These are considered Multiple Stages.
Post Title: Re: Powder Coating Services (The_Chosen_One)
Posted by: Jonnie Fraz at 11:35 PM 5/10/2008
if you weren't so far away i'd have you do my whole suspension. good luck with everything!
Post Title:
Posted by: The_Chosen_One at 6:55 AM 5/11/2008
Yea Im not looking to make a boatload of money pretty much cover my expenses and a few extra bucks to spend on the weekends.
Thats right M tr4nch pumas and powdercoating. Powdercoating is what pays for the pumas :p
Post Title: Re: (The_Chosen_One)
Posted by: Eikon at 11:00 AM 5/28/2008
Single stages are 1 coat colors such as Mirror colors, Flat, Textured.
Multiple stages are translucents, candies, special effects, clear coats etc.
For multiple stages contact me but usually its $10 more.
This special will end July 11.
Post Title: Re: (The_Chosen_One)
Posted by: Beancooker at 12:17 AM 6/15/2008
I would like to get my engine cover painted, but it's plastic... So is this something that can be powdercoated?
If not the plastic, what about the top half of a plenum? It's aluminum...
Post Title:
Posted by: The_Chosen_One at 5:09 AM 6/15/2008
For the plenum if it fits your standard kitchen oven than I can coat it.
Post Title: Re: (The_Chosen_One)
Posted by: grmreapr at 9:24 PM 6/16/2008
Julian, thank you!
Post Title:
Posted by: The_Chosen_One at 11:18 AM 6/27/2008
| Quote, originally posted by xX RB Xx » |
| hey do i send you my valve cover or do you have one already? and is it possible to do a blue crinkle on a KA DOHC? |
Depends on the motor. If its for a SOHC or s13 DOHC than for an extra $15 I can purchase one for you. But if its like SR, RB, S14 DOHC than you'll have to send it in.
I can do a blue wrinkle. Are you looking for a dark blue, light blue?
Post Title: Re: (The_Chosen_One)
Posted by: Warped161 at 7:14 AM 6/29/2008
| Quote, originally posted by The_Chosen_One » |
Depends on the motor. If its for a SOHC or s13 DOHC than for an extra $15 I can purchase one for you. But if its like SR, RB, S14 DOHC than you'll have to send it in. I can do a blue wrinkle. Are you looking for a dark blue, light blue? |
ok sweet... im looking for a light blue.. but not a baby blue either.. here this is what color im looking for..
do you think you could do that color?
Post Title: Re: (xX RB Xx)
Posted by: xX RB Xx at 10:28 AM 6/29/2008
| Quote, originally posted by Warped161 » |
| how much to powder coat the sohc throttle body? |
$30 but the TB has to be disassembled. If I remember correctly the TB has a plastic bearing that will melt when baking.
| Quote, originally posted by xX RB Xx » |
ok sweet... im looking for a light blue.. but not a baby blue either.. here this is what color im looking for..
do you think you could do that color? |
Closest I can get to that color is this.
As for price its $45 Shipped plus $10 to order the wrinkle blue. So $55 Shipped.
Post Title: Re: (The_Chosen_One)
Posted by: xX RB Xx at 6:28 PM 6/29/2008
I must say this cover was the MOST pain in the ***, I've never been so frustrated on a cover like this one. Overall Im happy with the concept its not perfect but overall Im pleased. The masking on this was ridiculous I think im gonna use painters tape next time instead of this crappy powder coaters tape.
This is a cover I did for a friend as well. I was having such a bad day with applying multiple coats so I had to shoot the pink when the cover was hot. This poses a problem of the powder hardening before I can wipe off the letters.
Post Title: Re: (The_Chosen_One)
Posted by: Warped161 at 2:21 PM 7/2/2008
However I dont think I'd want to do it again. I've never been so agitated coating a cover like I was with this cover.
Post Title:
Posted by: The_Chosen_One at 7:29 PM 7/3/2008
Post Title:
Posted by: JNM240 at 8:58 PM 7/3/2008
If it had the letters wiped clean that would be sweet!
Post Title:
Posted by: The_Chosen_One at 7:51 PM 7/6/2008
Dont worry man I'll still hook you up. What other things do you wanna get coated?
Post Title: Re: (The_Chosen_One)
Posted by: cmoody2006 at 10:35 PM 7/6/2008
As for the Throttle body. If you can disassemble it than I can coat it. If I remember correctly the TB has a plastic bearing that will melt. If the TB was 100% metal than there would be no problem.
So you wanna do a Black chrome which is the color of that thermostat housing. I can do that for you. If you can disassemble the TB than $170 Shipped. If you cant $140 Shipped.
Post Title: Re: (The_Chosen_One)
Posted by: driftin_sr20det at 3:04 PM 7/8/2008
thats how I feel about it. SO... here is a pic of what I would send you. It is a trim ring and a cast metal piece. Both are currently chrome (there's chrome under the black paint, but the black paint was removed). There are little red arrows in the pic but they are somewhat hard to see. I would request flat black for the projector surround and black chrome for the trim ring. And depending on price, I would send the handlebar your way for some black crinkle. I'd love to know how much and how fast! Thanks.
With Handle bars $70 Shipped, without $40 Shipped.
I just got some flat black in a few days ago :p
Turn around time is usually a week plus shipping time.
Post Title: Re: (The_Chosen_One)
Posted by: Simmsled at 7:47 PM 7/9/2008
http://s266.photobucket.com/al...ating
I'll make a website soon.
Post Title: Re: (The_Chosen_One)
Posted by: drftnrps13 at 9:01 PM 7/12/2008
954 675 3213
thanks,
paul
this is the color-- Blue Metallic TGIC (M1694002) source from ur suppliers website u posted on another thread
Modified by drftnrps13 at 9:15 PM 7/12/2008
Post Title: Re: Powder Coating Services (The_Chosen_One)
Posted by: Rare_f8 at 2:57 PM 7/16/2008
I am seeking the maroon texture you have on your sig... but particularly the intensity that is shown on the bolt hole of that ecu...
Post Title:
Posted by: The_Chosen_One at 3:51 PM 7/16/2008
I experimented more with that silver vein and I think I perfected it.
Post Title: Re: (The_Chosen_One)
Posted by: Rare_f8 at 10:04 PM 7/16/2008
Edit: I am liking the silver veins, I like mine done in same cept maroon instead of silver.
Modified by Rare_f8 at 12:34 AM 7/17/2008
Post Title:
Posted by: The_Chosen_One at 8:25 AM 7/17/2008
The Silver Vein is the base coat than I throw on the Red. I just posted the pic to show you that I was able to figure out how to get consistancy.
Post Title:
Posted by: The_Chosen_One at 8:30 AM 7/17/2008
Post Title: Re: (The_Chosen_One)
Posted by: Rare_f8 at 5:47 PM 7/17/2008
BTW what is the price if I do the prep work, besides final surface clean up before coating?
Modified by Rare_f8 at 6:51 PM 7/17/2008
Post Title:
Posted by: The_Chosen_One at 8:50 PM 7/17/2008
Is that my VC? It looks amazing! Def one of nico's finest!
Post Title:
Posted by: The_Chosen_One at 2:25 PM 7/18/2008
Let me know!
Also would this be achievable with a 1 or 2 stage powder?
Oh and one last thing... What's the progress in getting better equipment and doing other things than valve covers?
Post Title: Re: (The_Chosen_One)
Posted by: sharkerio_coupe at 2:02 PM 8/10/2008
I am glad i found your thread...i have some other things lined up for my carro, but soon as im ready i will be hittin u up man.
Keep it up
Post Title: Re: (ZenkiFactor)
Posted by: The_Chosen_One at 8:43 PM 8/10/2008
| Quote, originally posted by ZenkiFactor » |
| How close could you get to this (It's Duplicolor metal cast orange): Let me know! Also would this be achievable with a 1 or 2 stage powder? Oh and one last thing... What's the progress in getting better equipment and doing other things than valve covers? |
The closest I can get to that is either candy orange or candy burnt orange. I'd probably say Candy Burnt Orange.
Im not limited to types of object Im just limited to space. Trust me I would love to do bigger stuff but the required oven costs about $3000-$10000. If it fits your standard kitchen oven and is metal I can coat it.
Post Title:
Posted by: The_Chosen_One at 8:45 PM 8/10/2008
Heres Candy Orange.
Post Title: Re: (The_Chosen_One)
Posted by: cmoody2006 at 3:00 PM 8/11/2008
| Quote, originally posted by cmoody2006 » |
| did you ever track down an s13 valve cover? |
unfortunatly the JY has been low on DOHC. SOHC galore though. I made friends with one of the guys at the Junkyard, I would hook him up on P/C and he'd pick up some covers for me.
Post Title:
Posted by: twistedsymphony at 10:26 AM 8/25/2008
I'd love to do that calipers in red with the "NISSAN" lettering in black. Is that possible/difficult? If it's a pain just red with bare metal lettering is fine.
1. Do you have the ability to sand blast stuff or would I need to have that done before shipping?
2. How much to paint the two calipers?
Post Title: Re: (twistedsymphony)
Posted by: The_Chosen_One at 1:38 PM 8/25/2008
| Quote, originally posted by twistedsymphony » |
| I have a set of Aluminum 300zx front calipers (2 halves per caliper for 4 parts total) I'd like coated. They're fully assembled off of a junk yard car, I'm going to pull them apart but I think they'd probably need to be sand blasted before they could coated. I'd love to do that calipers in red with the "NISSAN" lettering in black. Is that possible/difficult? If it's a pain just red with bare metal lettering is fine. 1. Do you have the ability to sand blast stuff or would I need to have that done before shipping? 2. How much to paint the two calipers? |
Its gonna be $80 Shipped. That includes prep, sand blasting, coating and shipping.
What kind of red you lookin for? Candy Red, Mirror Red? I can try doing the Black Lettering. Havent done raised letters in a different color but Im sure I could pull it off, although I think Red with Chrome/Brushed aluminum would look better
I actually have a order that im doing Z32 brakes and the customer wants me to do it in a 2 tone color so it'll give me a chance to experiment.
Post Title: Re: (The_Chosen_One)
Posted by: Slide_Society at 3:15 AM 9/3/2008
What color did you want.
Post Title: Re: (cmoody2006)
Posted by: cmoody2006 at 5:02 PM 9/6/2008
| Quote, originally posted by cmoody2006 » |
| |
Post Title:
Posted by: The_Chosen_One at 9:15 PM 9/6/2008
Post Title: Re: (The_Chosen_One)
Posted by: BMAR240SX at 5:09 PM 9/16/2008
i am looking to have my sub-frames powdercoated pink.
Post Title:
Posted by: The_Chosen_One at 8:09 AM 10/1/2008
| Quote, originally posted by The_Chosen_One » |
| I can throw a Clear coat on top of the black that contains red flakes built into the clear. |
Post Title: Re: (The_Chosen_One)
Posted by: Initial_R90 at 3:31 PM 10/16/2008
| Quote, originally posted by Initial_R90 » |
| you still doing things ? i would like a sr20 s13 cover done in hot pink wrinkle |
Yup still doing it. None of my suppliers carry Wrinkle Pink but they do carry lots of pinks in different shades.
Post Title: Re: (The_Chosen_One)
Posted by: maj Andres at 12:19 AM 10/21/2008
To answer your question yes powder coating will be on there pretty good, it bonds to the metal.
Post Title: Re: (The_Chosen_One)
Posted by: maj Andres at 12:54 PM 10/21/2008
Does anyone on this forum happen to know or have The_Chosen_One number? If you do, can you email me his number at sleepwalker4758@yahoo.com , I tried emailing him with no luck. I just wanted to know what going with stuffs i sent him. thanks in advance.
Post Title:
Posted by: The_Chosen_One at 11:49 AM 12/19/2008
My cell phone is 561-542-7619 in case you ever need to get a hold of me.
I just want you to know Im not gonna charge you the remaining amount so what you already paid is considered paid in full. I will email you the tracking number when I ship them off.
Post Title: Re: (The_Chosen_One)
Posted by: ZenkiFactor at 8:28 AM 12/24/2008
P.S. After the holidays I have a valvecover for a DOHC KA. I like that golden yellow on your gallery pics that's on the SOHC cover. Hopefully sending Z32 brakes afterwards for the same color.
I know that is some quality artwork just a layout and general color reference I do like that yellow in the gallery tho...
Modified by ZenkiFactor at 8:44 AM 12/24/2008
Modified by ZenkiFactor at 11:36 AM 12/24/2008
Post Title:
Posted by: The_Chosen_One at 9:54 AM 12/24/2008
I didn't have much fun doing the Z32 calipers. Plus with Valve Covers I get to do crazy stuff.
Which Gold SOHC cover were you talking about? The KA SOHC or the Honda SOHC?
Post Title: Re: (The_Chosen_One)
Posted by: ZenkiFactor at 11:38 AM 12/24/2008
The yellow in my MS Paint drawing is close to what I want.
Valve covers look amazing by the way.
Post Title:
Posted by: SuicidnS13 at 1:18 PM 1/3/2009
That black with the rainbow is called Prismatic Black the rainbow is built into that color. I checked with my supplier they dont sell it another base color nor in a additive form. I can do a clear coat in rainbow sparkles but it wont give that color changing effect.
Post Title: Re: (The_Chosen_One)
Posted by: sleepwalker4758 at 5:58 PM 2/12/2009
What's the deal? Give me a call you got my number, tried calling you and emailing you but got nothing. I'm still waiting.
Post Title: Re: (sleepwalker4758)
Posted by: The_Chosen_One at 4:29 PM 2/13/2009
| Quote, originally posted by sleepwalker4758 » |
| Hi Puma, What's the deal? Give me a call you got my number, tried calling you and emailing you but got nothing. I'm still waiting. |
Yup already spoke to you in the evening, package already on its way.
Post Title:
Posted by: Logan76 at 6:12 PM 2/13/2009
| Quote, originally posted by Logan76 » |
| Hey man, I need a B series Vtec valve cover done, and do you want it sandblasted before you get it? |
I'm your guy. I charge $65 Shipped. My price includes prep/shipping/and painting.
I appreciate the gesture of offering to sand blast, but I would advise not sand blasting a valve cover especially if the baffles are rivted and can't be removed. The reason for this is that the blast media will make its way into the baffles and make it increasingly difficult to remove. You dont want it to be floating around in your oil eating up your bearings.
For valve covers I use a chemical stripper to remove all coatings and get it down to bare metal, the leftover chemical gets burnt off in the oven when baking. I'll run it on a Wire Brush wheel to get what the stripper couldn't get.
Post Title:
Posted by: Logan76 at 6:39 PM 2/14/2009
Thanks
Jordan
I like your black with rainbow color flake in it it looks really sweet.
Post Title: Re: (Slideways^Jordan)
Posted by: The_Chosen_One at 8:40 AM 3/2/2009
| Quote, originally posted by Slideways^Jordan » |
| Wow your powder coating is really nice quality man whats your email address i need to talk to you about your price on powder coating my S13.4 SR20det valve cover I had fab'd up for me. Thanks Jordan
|
my email is the_pumaking@yahoo.com
I recently did some rainbow flake cover.
Post Title:
Posted by: The_Chosen_One at 8:46 AM 3/2/2009
Post Title:
Posted by: The_Chosen_One at 6:54 PM 3/3/2009
Post Title: FN-QR
Posted by: r34 gtr at 1:36 PM 3/4/2009
| Quote, originally posted by r34 gtr » |
| Whats your turn around on these Julian? Think if I sent stuff out on a Saturday you could have it back by the following Saturday if I sent it 2 day express mail action? |
Depends on what you need done?
Post Title: FN-QR
Posted by: r34 gtr at 10:41 AM 3/7/2009
I mean, I was supposed to do this a long time ago, right? Well in a week my car will finally be apart long enough to have it done. The paint that's on there is chipping, dull, and faded.
My only request would be that somewhere on there you used some of that awesome black that I made you buy way back when and then never sent you my valve covers to use it on.
Post Title:
Posted by: The_Chosen_One at 11:10 AM 3/7/2009
im thinkin of doin the rear arms (not RUCAS) got aftermarket ones
as well as the knuckles?
let me know if you would be willing to do this and how much u think it would be.
thanks
josh
Post Title:
Posted by: The_Chosen_One at 7:00 PM 3/11/2009
Get me some pics on the parts but you may be looking at $30 Shipped each piece plus a discount depending on many pieces you have to do.
Post Title: Re: (The_Chosen_One)
Posted by: hbpignosePA at 7:46 PM 3/11/2009
I want to get some vinyl decals done to do some custom work on powder coating. I dont have money at the moment to drop for a plotter so I may look to you for some stuff done.
Let me know maybe we can trade services, I want to do a Nico cover and need vinyl stickers to mask stuff.
Post Title: Re: (The_Chosen_One)
Posted by: sharkerio_coupe at 3:34 PM 3/12/2009
| Quote, originally posted by The_Chosen_One » |
| replied. |
Post Title:
Posted by: Slideways^Jordan at 1:45 AM 3/18/2009
the lettering is actually silver, although it looks white in the pic. it's jsut a high gloss black, nothing fancy. how much would you charge? shoot me an e-mail in case i forget to check back here lol. junior_59@msn.com
Post Title:
Posted by: The_Chosen_One at 10:09 AM 3/20/2009
| Quote, originally posted by numbnuts240 » |
| so i just get them to you and you'll get them back to me? also, how would you want them, just disassembled and free of anything that isn't metal? |
Correct you ship to me, I ship back to you. Disassemble them such as removing the seals and pistons. I'll take care of the rest.
Post Title: Re: (The_Chosen_One)
Posted by: numbnuts240 at 10:18 AM 3/20/2009
| Quote, originally posted by cmoody2006 » |
| E-mail sent |
I haven't received any email.
Post Title:
Posted by: adrenalineMOTORWERKS at 4:34 PM 3/28/2009
I am so tempted to send you all my intercooler pipes, valve cover, intake manifold, and some other odds and ends.
Just out of curiosity, could you powder coat an exhaust manifold? Or would the powder coating crack and such at high temperatures?
Post Title: Re: (S13xCrazy)
Posted by: The_Chosen_One at 12:30 AM 3/29/2009
| Quote, originally posted by S13xCrazy » |
| oh man...your work is beautiful. I am so tempted to send you all my intercooler pipes, valve cover, intake manifold, and some other odds and ends. Just out of curiosity, could you powder coat an exhaust manifold? Or would the powder coating crack and such at high temperatures? |
Technically yes you can powder coat the exhaust manifold, unfortunately it will flake off from the intense heat. However you can get whats called Ceramic Coating, this actually improves performance and gain a little extra horsepower.
On a note the more parts you have me coat the more discounts you get.
Post Title: Re: (The_Chosen_One)
Posted by: S13xCrazy at 2:10 PM 3/29/2009
| Quote, originally posted by The_Chosen_One » |
I haven't received any email. |
Hmmm weird... I think I have the wrong e-mail for you then.... Shoot me an e-mail cmoody200689@yahoo.com I picked up a dohc s13 valve cover and a few other parts I want done and need to know where to send them to and how much it'll be
Post Title: Re: (S13xCrazy)
Posted by: The_Chosen_One at 6:25 PM 3/29/2009
| Quote, originally posted by S13xCrazy » |
| How much would I be looking at for my valve cover, intercooler piping, intake manfiold,thermostat housing outlet,ecu, and a couple small brackets?
|
Here are the prices for each item I charge.
Valve Cover $65
Intake Manifold $70
Intercooler Piping $20 per section
Thermo. Housing $10
Ecu $30
Small Brackets $10 a piece.
Since I dont know how many pieces you have for the brackets and intercooler piping. Once I know I can give you a discounted price.
Post Title: Re: (The_Chosen_One)
Posted by: S13xCrazy at 6:44 PM 3/29/2009
can i get a price with you stripping them down to metal, and then one with me stripping them down to metal?
Post Title:
Posted by: The_Chosen_One at 6:56 PM 3/29/2009
Valve Cover $50
Intake Manifold $60
ECU $20
Intercooler $15 per piece so $75.
Thermo. Housing FREE
Total $205 Shipped.
If parts stripped already $165.
What color you plan on doing?
Post Title: Re: (The_Chosen_One)
Posted by: S13xCrazy at 7:06 PM 3/29/2009
The car is silver with a black hood, top, and enginebay (convertible 240), but I want something that is going to stand out under the hood. I guess I have to attempt to put some more thought into it. Any suggestions? haha!
Post Title:
Posted by: The_Chosen_One at 7:21 PM 3/29/2009
| Quote, originally posted by Rare_f8 » |
| I'm still around, just wondering.. what do you have in white... textured(wrinkled you refer it to)..or maybe even in veins... just not sure how they look like..
|
I have Gloss White, Flat White in stock.
I can order White Vein, Textured White (looks like the white used on refrigerators)
Post Title: FN-QR
Posted by: Rare_f8 at 7:52 PM 3/30/2009
Modified by Rare_f8 at 9:08 PM 3/30/2009
Post Title:
Posted by: The_Chosen_One at 9:41 PM 3/30/2009
You have a rough estimate what it might cost then?
Post Title:
Posted by: The_Chosen_One at 10:47 PM 3/30/2009
to be honest, they are in storage. So that's why the wait...
I was going to do a maroon, but I saw this and decided to differ...
pictures are credited to Skrappy and his BnRPS13
Modified by Rare_f8 at 11:08 PM 3/30/2009
Post Title:
Posted by: The_Chosen_One at 11:27 PM 3/30/2009
any info is appriciated
thanks~Jon
thrwnsprkz(at)yahoo(dot)com
Post Title:
Posted by: The_Chosen_One at 10:53 PM 4/7/2009
Post Title: Re: (The_Chosen_One)
Posted by: bbiksey007 at 4:04 PM 5/7/2009
the SOHC is very tall and says "2400 12 Valve" down the middle in a block with a bunch of lines running down the middle. Says Nissan near the rear exhaust side of the cover. Has no spark plug holes.
Post Title: Re: (The_Chosen_One)
Posted by: bbiksey007 at 6:38 PM 5/7/2009
My price is $65 shipped. I can usually get it done within a day or 2 of receiving the cover.
Post Title: Re: (The_Chosen_One)
Posted by: bbiksey007 at 7:22 PM 5/7/2009
thanks
Post Title: Re: ^ (rb24t)
Posted by: White Comet at 8:53 PM 5/18/2009
| Quote, originally posted by rb24t » |
| i am looking to have my rb25 valve covers and front timing belt cover powder coated but im looking for a gold, not gold color but something like a gold plating shiny like chrome but gold. can you do this? and if so how much would you charge me? thanks |
How about a Candy Gold? or Candy Gold Plated
This is Candy Gold
This is Candy Gold Plated
This is Metallic Gold
I can do everything for $110 Shipped.
Post Title: Re: ^ (White Comet)
Posted by: The_Chosen_One at 8:56 PM 5/18/2009
| Quote, originally posted by White Comet » |
| 39.5 inches for the sway bar. |
Too big, however if you dont mind waiting a month or two I may be able to do it. Im going to be adding a oven extension so I can fit bigger things.
Post Title: Re: ^ (The_Chosen_One)
Posted by: White Comet at 9:03 PM 5/18/2009
| Quote, originally posted by The_Chosen_One » |
|
let me know thanks
Post Title:
Posted by: The_Chosen_One at 8:10 PM 5/19/2009
edit- woudl this basically be what you need besides your current setup?
http://www.caswellplating.com/powder/ceramics.html
Modified by White Comet at 11:37 PM 5/19/2009
Post Title:
Posted by: The_Chosen_One at 9:22 PM 5/19/2009
As you can see the liquid aint cheap.
Post Title: Re: (The_Chosen_One)
Posted by: White Comet at 9:33 PM 5/19/2009
Aaron
Post Title:
Posted by: The_Chosen_One at 6:56 PM 5/20/2009
| Quote, originally posted by The_Chosen_One » |
How about a Candy Gold? or Candy Gold Plated
This is Metallic Gold
|
i would be more interested in the candy gold plated as im looking for something like a chrome gold or like a gold ring would look like you know?
btw my valve covers and timing covers have been powder coated once already and i started stripping the timing cover and its pretty nasty will this effect the price?
Post Title:
Posted by: The_Chosen_One at 5:12 PM 5/26/2009
jcala003@gmail.com
[IMG][/IMG]
Post Title:
Posted by: The_Chosen_One at 7:32 PM 6/23/2009
The pic is very blurry. Is it a textured black like a wrinkle black? Or you looking for something slightly flat and slightly glossy.
And what do you mean by outline of a decal on the side? Are you saying you want a decal put on and spraying so that it leaves a outline?
Post Title: Re: (The_Chosen_One)
Posted by: rootS13 at 8:34 PM 6/23/2009
And yes I want an outline of a decal that I will provide to be put on the top of the valve cover... on the opposite side of where the "Nissan Twin Cam
16-Valve" is.
Let me know.
Post Title:
Posted by: The_Chosen_One at 9:32 PM 6/23/2009
This is our Mint Green
this is Surf Green
This is called Purple Wave.
Post Title:
Posted by: exportA at 9:01 AM 6/30/2009
i'm just going to look up if i can find any powder coater's out here first.. see how much it is then choose..
thanks though man! 
Post Title: Re: (exportA)
Posted by: s14tan at 4:51 PM 7/12/2009
Looking to do my VC that color.
Post Title:
Posted by: The_Chosen_One at 2:58 PM 7/13/2009
Black Chrome
Gun Metal Grey
Post Title: Re: (The_Chosen_One)
Posted by: s14tan at 9:49 PM 7/13/2009
Concord Grey
Post Title: Re: Powder Coating Services (couni's_91_240)
Posted by: 300zx1316 at 3:26 PM 8/11/2009
| Quote, originally posted by 300zx1316 » |
| YO DOES ANY1 HAVE ANY CLUE ON WAT HAPPEND TO THIS GUY? REASON IM ASKING IS BCUZ I SENT HIM MY PLENUM BOUT 2 1/2 WEEKS AGO N I STILL HAVNT RECIEVED NOTHING AND HE DNT EMAIL ME BAK ANY1 HAVE HIS PHONE · OR A WAY I CAN CONTACT HIM ID APPRECIATE IT... |
Try his Myspace.
http://www.myspace.com/pumakingca18
Post Title: Re: Powder Coating Services (s14tan)
Posted by: brizanden at 11:20 PM 8/17/2009
anyone know whats up 
Post Title: Re: ^ (ca18detgabby)
Posted by: White Comet at 8:16 PM 8/18/2009
| Quote, originally posted by s14tan » |
Try his Myspace. |
thnx i sent him a msg his last login in was today so hopefully he will msg me bak soon cuz its been like 3 weeks already and hcnt heard from him since he recieved my plenum.. thnx again for the link
Post Title: Re: Powder Coating Services (300zx1316)
Posted by: 300zx1316 at 1:11 PM 8/23/2009
lol you beat me to it.
Post Title:
Posted by: wantaRHD180sx at 12:40 PM 9/18/2009
< Contact Us - NICO
>
Visit G37Driver.com for Infiniti G37 Information
NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan Motor Company or Nissan North America.
Information © Copyright © 2000-2009 by NICOclub
All rights reserved. Material may not be copied or reprinted without written permission.
Visit 370zclub.org for Nissan 370z Information