FYI, t was 69 bucks but I sent him a best offer of 50 + shipping and he took it.
http://cgi.ebay.com/ebaymotors...l1116
Post Title:
Posted by: T45 at 4:56 AM 5/6/2008
So where do the other wires go? hehehehehehe
Post Title: Re: (T45)
Posted by: elwesso at 3:47 PM 5/6/2008

Will be really useful on the dyno.....if I ever get it finished. 
Post Title: Re: (T45)
Posted by: Chrispy300 at 11:38 PM 8/6/2009
This is what I have found.
Q45 side:
Brown and Yellow > Pin 21 on VH ECU
Black and Blue > Pin 22 VH ECU
White > Pin 47 VH ECU
Brown and White > Pin 31 VH ECU
Brown > Not sure, speedo?
Black > Body earth
Z32 Side:
Blue > Pin 21 VG ECU
White > Pin 22 VG ECU
Orange > Pin 31 VG ECU
Black and White > Pin 47 VG ECU
Green > Not sure, speedo?
Black > Ground
No guarantee that those colours are right on the VH side, I have a '93 Jap Spec motor and am trying to use '94+ US Spec Q45 diagrams. Pinouts appear to be the same though and the motor runs.
I've matched up the pin numbers for the 2 ecu's so that the VH Pin 21 is connected into where Pin 21 from the VG ecu used to go.
This is what Nick had in his VH to Z32 wiring sheet, and makes sense from the wiring diagrams I have.
I'm using a ECUTalk readout rather than the usual laptop connection. I have verified it work on a mates Z32. According to the ECUTalk people it has worked on VH's before (I've seen one working with my own eyes).
So what's the problem? Any suggestions.
I'm just going to try my spare ECU and see what happens...
Post Title: Re: (Chrispy300)
Posted by: Chrispy300 at 11:45 PM 8/6/2009
< Contact Us - NICO
>
Visit G37Driver.com for Infiniti G37 Information
NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan Motor Company or Nissan North America.
Information © Copyright © 2000-2009 by NICOclub
All rights reserved. Material may not be copied or reprinted without written permission.
Visit 370zclub.org for Nissan 370z Information