so first off you'll need some window switches from a 02-06 altima (coudl also be maxima to i just stubbled across these one day at the junker) you can see ours on the left (non transparent switch and the right transparent switch take yer switch out unscrew the 3 aroudn the whote cap pop the top off the white cap, firstly take the window lock button off carefuly otherwise it won't release from the bottom portion of the unit pop your switches off now get your altima switch out, and gently shave the plastic nubs down on the back and middle pieces, this is so you can still go up and down without the switch sticking, trial and error just don't shave off alot at first drill holes in the base front of each switch area fit for leds wire your leds up, i wried all 3 up in series to the master auto button light that is already attached to the board so now the lights will all come on when you turn the lights on to your car for the pass and back seat lights i wired them to a power source (cig lighter) so they are always on but you could do that and put a switch somewhere so you can turn them on off on your own pass & back switch now my leds were freakin' bright so i used 2 1.5k ohm resistors on the wires (this is what i had in the house), depends what you want to for brightness) put it all back together
i also just replaced all the bulbs in the hvac with leds
SentraStace-- 07 Nissan Sentra, Super Black Lowered (Eibach sportline springs), Stillen Front Lip, Stillen Full catback Exhaust, stillen hi flow intake, debadged, 6/10 tinted tailights, 30% tinted windows, 8000K HID's and matching fog lights plus matching license plate illuminators, blue led lighted interior, black painted grill....18 inch konig 'again 4' rims wrapped in neo gen tires....
NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan Motor Company or Nissan North America.
