i got this site from another thread on this site

http://www.trademotion.com/par...gID=2

this is a picture of my window problem on the truck. does anyone know the exact name of these parts so that i can identify them on the site and order them?

anyhelp will be great

http://www.trademotion.com/par...gid=2

That's the only thing I could think of.

http://toronto.kijiji.ca/c-car...86114

dont think theyd fit your pathy roger as you got a 2001. I might look into them. theyre used tho so im unsure. mine arent rusted but their bubbling!

thanks QXXX4

and sorry if im stealing them from you.

the lady selling them is going to get back to me but i think im gonna drive down and check it out.

did anyone try that silicone trick yet?

Old to Semi - New

I treid hard to get the trim out without taking the door apart but no luck.

So first i removed the screws and those little push on tabs so i could remove the interior door panel.

all push - ons in red

so now the door should like like this.

next i removed the bolts holding up the window and lowered the glass into the door. this is much easier to do with the window halfway up. when the glass was removed i then lowered the window holder and droppped the window below that.

Next i removed the bar thats seperates the 2 pieces of glass and all the rubber from around the window. the bar has 3 screws 1 at the top and 2 at the bottom behind the door panel.

I then painted this bar and removed the glass easily without the bar in the way.

Everything Apart

all i did next was pop out the trim i needed to replace insert the new one and started putting everything bac together in reverse order.

i also did the passenger rear door aswell

thanks to all who made this possible

thanks for all your efforts man it means alot to us!