To give you a little background, I do powder coating on the side for fun. I do the painting out of my buddys garage. I've been coating since October so Im still new at this but pretty much have the hang of it.

To give you a run down of my prices for valve covers I usually charge a $15 per cylinder fee so 4 clynders are $65 Shipped. But the more cylinders the cheaper it will be. These prices are usually for Single Stages, Multiple stages are $10 extra which require a Base Coat and Top Coats.

Im very flexible on prices so if your on a tight budget I can work with you to try and get you covered.

I do offer warranties on the coatings which is 60days.

Because I do this for fun/side I only powdercoat on certain days, which are Tuesday, Thursdays, and Saturdays. I try to get them done as soon as I can but since I work at another job I may sometimes be called in. But I'll try to get everything done in a timely manner usually within the week of arrival.

Just a few examples that I've done in the past.

These are single stages, they vary from wrinkle, to mirror gloss, flats, etc etc.

These are considered Multiple Stages.

if you weren't so far away i'd have you do my whole suspension. good luck with everything!

Yea Im not looking to make a boatload of money pretty much cover my expenses and a few extra bucks to spend on the weekends.

Thats right M tr4nch pumas and powdercoating. Powdercoating is what pays for the pumas :p

http://www.240sxconvertible.com - The internet's only 240sx 'vert site!

Joshua 1:9 "Have I not commanded you? Be strong and courageous. Do not be terrified; do not be discouraged, for the LORD your God will be with you wherever you go."

Single stages are 1 coat colors such as Mirror colors, Flat, Textured.

Multiple stages are translucents, candies, special effects, clear coats etc.

For multiple stages contact me but usually its $10 more.

This special will end July 11.

I would like to get my engine cover painted, but it's plastic... So is this something that can be powdercoated?

If not the plastic, what about the top half of a plenum? It's aluminum...

For the plenum if it fits your standard kitchen oven than I can coat it.

Hypocrisy Update: Al Gore’s Home Uses 20 Times the Energy of Average American’s

Julian, thank you!

Depends on the motor. If its for a SOHC or s13 DOHC than for an extra $15 I can purchase one for you. But if its like SR, RB, S14 DOHC than you'll have to send it in.

I can do a blue wrinkle. Are you looking for a dark blue, light blue?

ok sweet... im looking for a light blue.. but not a baby blue either.. here this is what color im looking for..

do you think you could do that color?

$30 but the TB has to be disassembled. If I remember correctly the TB has a plastic bearing that will melt when baking.

Quote, originally posted by xX RB Xx »

ok sweet... im looking for a light blue.. but not a baby blue either.. here this is what color im looking for.. do you think you could do that color?

Closest I can get to that color is this.

As for price its $45 Shipped plus $10 to order the wrinkle blue. So $55 Shipped.

I must say this cover was the MOST pain in the ***, I've never been so frustrated on a cover like this one. Overall Im happy with the concept its not perfect but overall Im pleased. The masking on this was ridiculous I think im gonna use painters tape next time instead of this crappy powder coaters tape.

This is a cover I did for a friend as well. I was having such a bad day with applying multiple coats so I had to shoot the pink when the cover was hot. This poses a problem of the powder hardening before I can wipe off the letters.

However I dont think I'd want to do it again. I've never been so agitated coating a cover like I was with this cover.

If it had the letters wiped clean that would be sweet!

http://forums.nicoclub.com/zerothread?id=329053
Check out my build...

Dont worry man I'll still hook you up. What other things do you wanna get coated?

http://forums.nicoclub.com/zerothread?id=329053
Check out my build...

As for the Throttle body. If you can disassemble it than I can coat it. If I remember correctly the TB has a plastic bearing that will melt. If the TB was 100% metal than there would be no problem.

So you wanna do a Black chrome which is the color of that thermostat housing. I can do that for you. If you can disassemble the TB than $170 Shipped. If you cant $140 Shipped.

With Handle bars $70 Shipped, without $40 Shipped.

I just got some flat black in a few days ago :p

Turn around time is usually a week plus shipping time.