PalmerWMD

Offline
17119 posts
2004 350Z
Seoul na
4-29-2002
|
great Post!!I will sticky it. Fred...:thumbup
"It's not that Life wont give you anything, It's all about the way you ask" RIP Danzig, Breslau and Stettin.. may the squatters that live in your corpses, get what they deserve in this life or the next 1989 240 SX Coupe (SR20DET, Silvia Front end, Sold) 2x91,92,94 Q45's (lost one to chainguides, one totaled, others sold) 2002 Maxima (pearl, traded in) 2003 Sentra SER SPEC-V (coilovers, I/H/E, etc, totaled) 2003 G35 Coupe (vandalized) 2004 350Z (DB ATI Supercharged 9psi , various Mods, 411 rwhp sold) 2004 350Z (PPW, graphics Kits, Vortech 8psi , LOTS of bolt ons, full Nismo suspension, BBK etc etc)
|
SNEEK-E HONDA LEGEND
Offline
20 posts
Washington State
5-3-2003
|
I had a 1991 Stanza GXE, and the front doors used 4x6. I believe this is true for all 90-92 Stanzas I have seen.
 I love cars.....
|
blackJ30T
Offline
20 posts
7-24-2002
|
And the J30 Q45 "A" pillar tweeter?
Look down the road.
|
Simmsled
Supporting Member

Offline
982 posts
2009 VW GTI Thunderbunny
Carmel Indiana
11-24-2002
|
got it
|
Hijacker
240SX Moderator

Offline
13121 posts
'92 240sx Convertible
Olney IL
8-13-2003
|
i don't know if the 240 S13 coupes have the same problem as the hatches, but anything that is slightly larger in depth will have trouble on the rear deck. the mounting circle has a flat side that interferes with deeper 6.5's. I had to get a pair of alpines to fit (upside down because the connectors couldn't clear the flat spot when mounted right side up) because the boston accoustics i had bought were too big
-Bart USAF Officer Candidate Class 10-07
S13 Auto -> Manual Swap / My 240SX / Convertible Top Replacement / Silvia Fog Light Wiring / DIY: SR20DET Rebuild Stacey L. Childs, NICO Mom
|
Simmsled
Supporting Member

Offline
982 posts
2009 VW GTI Thunderbunny
Carmel Indiana
11-24-2002
|
i'll see what i can do, thanks.
|
whosurdaddy018
Offline
64 posts
1-9-2004
|
i know i would be highly appreciate int and im sure im not the only one.
lots to come thats all i can say
|
twofourzeroSX

Offline
774 posts
91 sileighty
Old Saybrook ct
4-12-2004
|
HEY..im not sure but i dont think that the 6.5's fit too well in the 93 240sx 2door i tried fitting my brothers speakers in and it seemed that the holes were too close together. Also, sounddomain.com says that 7 inches will fit... can u check on that?? thanx
http://i92.photobucket.com/alb...g.jpg 1991 sileighty- SR20det !!!!  175k on body 42k on engine! The good stuff- 1995 sr20det blacktop w/ T-28 (8 psi), megan racing exhaust manifold + turbo extension, J30 Vlsd w/ axels and abs driveshaft, Circuit sport catback, westco sealed slim battery,heavy throttle heater piping, Walbro 255 fuel pump, exedy flywheel, ACT SS clutch, Greddy Vspec Intercooler, Greddy downpipe, Greddy hotpipe, Greddy Type RS BOV, Cusco catch can, NGK Iridium Spark plugs, Koyo Radiator, Flex-a-lite Duel fan, Nismo Mount kit, Greddy Airnex intake, Catco hi-flow cat, tien s-techs, kyb agx's
|
twofourzeroSX

Offline
774 posts
91 sileighty
Old Saybrook ct
4-12-2004
|
Yeah but they dont come stock like that, how did u get 6x9's anyway?
|
BuddhistWitch
Offline
117 posts
85 Saab 900 Turbo
Bay Area, CA
12-9-2003
|
No clue, opened it up to take out the fronts and had rockfords. Checked the back and had 6x9s. Could have been a dealer-performed upgrade. It's got power everything and all options except leather.
93 240SX SE: Currently: Wrecked and Sold 85 Saab 900 Turbo: Currently: Alive and a POS
|
John I30

Offline
42 posts
Car mods,sports,my wife
Coventry,ri
4-1-2004
|
This is a kick *** thread... i was wondering if anyone had any info on the Infiniti i30 speakers....like 1) speaker sizes 2) what do i do, to get rid of the amps in the car so i can use aftermarket speakers and a aftermarket deck. 3) is there a friggen website out there that has infiniti parts, and infiniti parts only... and when i mean parts, i mean, headlights, cefiro mods. lol..i go to millions of websites that say they have infiniti parts but all they have is lightbulbs that will fit any damn car lol.im just a guy tryn to hook up my i30, and give it the pimp status it god damn deserves...but its gettin to be a big pain in the arse lol i got some stuff done, but i dont wanna rip anything out of my car again unless im doing it all AT ONCE....deck gets put in same day as visor screens,door speakers(if i can ever find out what size the damn things arelol). HELP A INFINITI FAMILY MEMBER OUT!!!!
1997 black Infiniti i30 so far 2x 5inch headrest monitors ps2 4x 10inch sony xplod 2x 800.2 punch (rockford fosgate)
|
mrmark
Offline
291 posts
NJ/DC
7-4-2004
|
Any idea on speaker sizes for the 2004 M45 ???Thanks...
|
97Q45t

Offline
507 posts
Viper RT/10, A8 Quattro
Houston TX
2-6-2003
|
| « Re: Nissan/infiniti Speaker Sizes (Simmsled) | 8:39 PM 10/5/2004 |
|
Please edit the sizes for 97-01 Q45 speakers:Front door: 6.5 inch Rear door: 5.25 inch Rear deck: 6.5 inch Those were the sizes for my '97 Q45 speakers when I replaced them. Thanks.
97-01 INFINITI Q45'S WEBSITE: http://fgy33.tripod.com'95 Viper RT/10 '98 Audi A8
|
Simmsled
Supporting Member

Offline
982 posts
2009 VW GTI Thunderbunny
Carmel Indiana
11-24-2002
|
Gotcha!
|
nsk2002
Offline
13 posts
1997 240sx se
Ventura CA
4-23-2004
|
| « Re: Nissan/infiniti Speaker Sizes (Simmsled) | 8:27 AM 6/7/2005 |
|
So should I order 6.5's all around for my 1997 240sx SE. Is that the closest size?
|
nsk2002
Offline
13 posts
1997 240sx se
Ventura CA
4-23-2004
|
| « Re: Nissan/infiniti Speaker Sizes (nsk2002) | 11:46 PM 6/8/2005 |
|
I read this post on: "just a note, 6.5's dont fit 95+ 240s very well, at least not memphis audio, the holes are actually 6.75's, on the back i used sticky insulation around the speaker hole to fill the gap, with velcro to hold the speakers down (no room for a drill, too frustrated to make an adapter), up front, i was able to get screws to partially bite into a modified speaker cup, an adapter plate, again, would be best. ast"SO do I buy 6.75's 5.5 cutout all around or 6.5 components with 5 inch cut out for the front 6.75 for rear with 5.5 cutout Confused.....
|
Silvia2b

Offline
773 posts
1995 240sx SE /2008 Acura MDX Tech
Portland OR.
10-28-2002
|
| « Re: Nissan/infiniti Speaker Sizes (nsk2002) | 3:53 PM 6/10/2005 |
|
Same sizes front and rear it's just easier to mount in plastic than in the metal rear decklid for the aftermarket style speakers. The factory speakers are low impedance and using the factory amps you will get less power per channel with a typical 4ohm driver, this is why people doing this hear distortion. They must be turning it up louder to achieve the same volume and then the amp is clipping.
David 95' 240 SE
|
BOBCAT

Offline
292 posts
2000 Maxima, 94 SER
louisville ky
2-25-2005
|
You didnt have the speaker sizes on the 5 gen and 5.5 gen MAXIMA. front = It is 6.5 in the front door panels with 1 inch tweater in the A-pillarIn the rear = 6.5 in the rear door and 6.5 woofer in the rear deck. All powered by a bose amp.
|
Simmsled
Supporting Member

Offline
982 posts
2009 VW GTI Thunderbunny
Carmel Indiana
11-24-2002
|
maxima updates for 5th gen and 5.5 gen done THANX!!
|
insanitykouki

Offline
145 posts
1998 Nissan 240sx SE
Greenville MI
10-24-2006
|
| « Re: Nissan/infiniti Speaker Sizes (Simmsled) | 9:30 AM 12/5/2006 |
|
for a 98 nissan 240sx would a depth of 2 9/16th be good or would that be too much and i would need to find a shallow mount speaker for front and rear?
Nissan Motorsports = NISMO. Honda Motorsports = HOMO?
 1998 Nissan 240sx SE: JWT Cams - EnjukuRacing 11lb aluminum driveshaft - HotShot Header - Fidanza 11lb aluminum flywheel - Clutchmaster clutch - KYB GR2 shocks - UnorthodoxRacing aluminum underdrive pulley - AEM intake - Walbro fuel pump - remapped ECU - Momo titanium/carbon fiber shift knob - Tein S-Tech lowering springs - Clear Corner Lenses - Blitz Nur Spec-R Catback - B&M Short Shifter - 350Z rims & proxes -
|
SonzofGod
Offline
40 posts
2002 Infiniti Q45
Columbia MO
3-30-2006
|
| « Re: Nissan/infiniti Speaker Sizes | 9:11 AM 3/9/2007 |
|
What about speaker sizes for 2002+ Q45s?Thanks, Nick SonzofGod
|
davidahn
Offline
9 posts
2006 Infiniti M45 Ivory Pearl non-sport
Apple Valley CA
10-25-2007
|
| « Re: Nissan/infiniti Speaker Sizes (giiaaa) | 6:36 PM 10/29/2007 |
|
Anyone know the replacement sizes for the 2006 M35/M45? Thanks!David
|
MoSinister

Offline
280 posts
'95 S14 KA24DE
Plano tx
8-18-2006
|
| « Re: Nissan/infiniti Speaker Sizes (Simmsled) | 10:22 AM 11/8/2007 |
|
Just for clarity's sake, the '95-'98 240sx are listed in this thread as 6.5 front and back. I recently removed the fronts in a '95 base model and they were in fact 5.25 in the front. Clarion dual-cone paper to be exact. I did not remove the original rears (was wife's car at the time and she had a shop replace those along with a new HU a couple years ago), so I can not say what they were. But the original factory size of the fronts on a base model looks to be 5.25. I don't know if the SE came with the 6.5s standard.Regards.
 95 FN2 zenki 97 Miata M-edition
|
lkptpete
Offline
28 posts
2009 cube
Lockport NY
1-14-2008
|
| « Speaker Sizes 1992 Q45 | 9:09 AM 1/18/2008 |
|
1992 Q45... Just finished the 1st stage of an aftermarket soundsystem. Did a new head unit and replaced amplified Bose speakers with aftermarket speakers (polk audio). Rear deck 6"X9" (which you already knew) But in the front doors, I COMPLETELY REMOVED the Bose enclosures with the 4"-ers in them and made plates that have the same footprint as the enclosures. I was able to fit a matching set of 6"X9" speakers in the front doors. (I could have done 6.5" as well). I have photos of the plates if anyone wants to see them. I also removed the stock metal grills in the front doors and painted them black (they were bourgandy like the rest of the interior) then I reinstalled the grills before I put the door panels back on. They look AWESOME (again I have pics if anyone wants to see them). I used black appliance enamel (very chip resistant)-Pete http://www.q45.org/gallery2/v/...dex=1 http://www.q45.org/gallery2/v/...dex=1
Modified by lkptpete at 10:08 AM 1/20/2008
|
SketchyRollin564

Offline
3697 posts
SR hatchback in the werks
Boca Raton, South Florida
3-24-2007
|
| « Re: Nissan/infiniti Speaker Sizes (MoSinister) | 9:30 AM 6/17/2008 |
|
| Quote, originally posted by MoSinister » | | Just for clarity's sake, the '95-'98 240sx are listed in this thread as 6.5 front and back. I recently removed the fronts in a '95 base model and they were in fact 5.25 in the front. Clarion dual-cone paper to be exact. I did not remove the original rears (was wife's car at the time and she had a shop replace those along with a new HU a couple years ago), so I can not say what they were. But the original factory size of the fronts on a base model looks to be 5.25. I don't know if the SE came with the 6.5s standard. Regards. |
So if i have a base model and i want 6.5" speakers up front, what would i need to do? would i be safetr cutting or getting SE door panels?
Image exceeds 600 x 200 sig size limit
|
SketchyRollin564

Offline
3697 posts
SR hatchback in the werks
Boca Raton, South Florida
3-24-2007
|
| « Re: Nissan/infiniti Speaker Sizes (SketchyRollin564) | 10:19 PM 6/19/2008 |
|
bump? i wanna do it soon lol
|
TrueVillan

Offline
1151 posts
Black 95 Zenki
Rockville MD
6-29-2007
|
| « Re: Nissan/infiniti Speaker Sizes (SketchyRollin564) | 11:14 PM 6/19/2008 |
|
Hey Sketchy, when I did my old S14 base model I used 6.5 all around and they fit alright.A little tight and I had to bend and cut some of the little slots on the speakers to get them screwed on. Nothing complicated, you just have to see for your self if you like the fitment. I will be doing the same pretty soon.

|
JapJap_
Offline
1 posts
Nissan Murano
Vancouver BC
7-9-2008
|
| « Re: Nissan/infiniti Speaker Sizes (TrueVillan) | 9:00 PM 7/9/2008 |
|
hi i`m a new member here so....hello to everyone. i just want to know the size of the speakers on nissan murano (2003) thank you
|
neonbomb
Offline
452 posts
Pittsburgh/Detroit
4-22-2007
|
| « Re: Nissan/infiniti Speaker Sizes (JapJap_) | 1:39 PM 7/10/2008 |
|
we need DEPTH measurements too!
95' s14 Stock + rb25 neo
|
the converted
Moderator

Offline
2512 posts
1991 240sx, 2003 Maxima 6 speed, building a Lotus 7 replica
Boston, Ma Danbury CT
2-21-2007
|
| « Re: Nissan/infiniti Speaker Sizes (neonbomb) | 2:22 PM 7/10/2008 |
|
| Quote, originally posted by neonbomb » | | we need DEPTH measurements too! |
It's not an Impreza don't worry about it

|
cerveza_fiesta
Offline
12 posts
1993 Pathfinder SE 4x4
Fredericton NB
8-29-2008
|
| « Re: Nissan/infiniti Speaker Sizes (Simmsled) | 5:16 AM 9/8/2008 |
|
93 pathfinder with the clairon systemRear speakers roof mounted, front speakers in doors. ALL 5X7 despite what futureshop may tell you. These are not the same as the 93 pathfinders with 6x9 speakers in the cargo compartment sides
|
the converted
Moderator

Offline
2512 posts
1991 240sx, 2003 Maxima 6 speed, building a Lotus 7 replica
Boston, Ma Danbury CT
2-21-2007
|
| « Re: Nissan/infiniti Speaker Sizes (cerveza_fiesta) | 9:28 AM 9/8/2008 |
|
Sure it's not a 94? Nissan does weird things with manuf. dates. My 03 Max was built in May 2002
|
Kristoefur

Offline
21 posts
2k3 Nissan Maxima GLE
Fayetteville Arkansas
9-15-2008
|
| « Re: (BOBCAT) | 10:34 AM 9/16/2008 |
|
| Quote, originally posted by BOBCAT » | You didnt have the speaker sizes on the 5 gen and 5.5 gen MAXIMA. front = It is 6.5 in the front door panels with 1 inch tweater in the A-pillarIn the rear = 6.5 in the rear door and 6.5 woofer in the rear deck. All powered by a bose amp. |
C | Quote, originally posted by BOBCAT » | You didnt have the speaker sizes on the 5 gen and 5.5 gen MAXIMA. front = It is 6.5 in the front door panels with 1 inch tweater in the A-pillarIn the rear = 6.5 in the rear door and 6.5 woofer in the rear deck. All powered by a bose amp. |
Correction. My 5.5 gen Maxima GLE WITH bose had 5.25 inch speakers in the rear and an 8 inch subwoofer in the rear deck. The fronts were 6.5 inch. You may want to clarify before someone goes out and purchases the wrong speaker sizes.
_ -------------- _ - - /Oo ___Maxima___ oO\ |=_|______________|_=|
|
dondada661

Offline
1 posts
2005 Nissan Maxima SE
Bakersfield Ca
1-29-2009
|
| « Re: Nissan/infiniti Speaker Sizes (Simmsled) | 4:36 PM 1/29/2009 |
|
Within this section it states that the tweeter size in the pillars for a 2003 Maxima are 1in. Is this the same case for the 05 Maxima? Also is it pretty easy to replace yourself with after market tweeters?Thanks for the help
Don Williams aka. Don Dada
|
the converted
Moderator

Offline
2512 posts
1991 240sx, 2003 Maxima 6 speed, building a Lotus 7 replica
Boston, Ma Danbury CT
2-21-2007
|
| « Re: Nissan/infiniti Speaker Sizes (dondada661) | 6:58 PM 1/29/2009 |
|
1" is pretty standard. ease of replacement really depends on how nissan mounted them but shouldn't be too bad.
|
RogerRabbit
Offline
1 posts
Geneva
2-3-2009
|
| « Re: Nissan/infiniti Speaker Sizes (Simmsled) | 3:13 PM 2/3/2009 |
|
I have just bought a second hand Nissan Almera Sport 3-Door Hatchback (year of manufacture 2001). I want to replace all the speakers as the factory fitted ones sound awful right now. Could anyone tell me how many there are and of what size? Are they easy to replace for someone who has little DIY experience when it comes to cars.Any advice is much appreciated. Roger.
|
the converted
Moderator

Offline
2512 posts
1991 240sx, 2003 Maxima 6 speed, building a Lotus 7 replica
Boston, Ma Danbury CT
2-21-2007
|
| « Re: Nissan/infiniti Speaker Sizes (RogerRabbit) | 5:00 PM 2/3/2009 |
|
Should be 6.5" all around.
|
Clark W. Griswald

Offline
101 posts
'93 240SX Vert/ '87 Toyota Cressida
Hampton Roads Va.
3-20-2009
|
| « Re: Nissan/infiniti Speaker Sizes (the converted) | 7:51 AM 4/6/2009 |
|
What about 240sx convertibles? What spekaers do they run stock?
|
the converted
Moderator

Offline
2512 posts
1991 240sx, 2003 Maxima 6 speed, building a Lotus 7 replica
Boston, Ma Danbury CT
2-21-2007
|
| « Re: Nissan/infiniti Speaker Sizes (Clark W. Griswald) | 8:59 AM 4/6/2009 |
|
4x6 front, 6.5 rear. Same as the coupe, just in side panels instead of on the parcel shelf.
|
| First 1 2 > Last |